Hey Guys,

Motor is coming out over the weekend was wondering if you can remove the motor and leave the Gearbox in the car?

Cheers

 

No you cant, you have to drop the motor, tyranny and front suspension all in one. You can leave the center and rear diffs in the car tho.

 

If you don't have a lift you can unbolt tcase and pull motor with trans from top.

 

I dont have a lift but where pulling the head off with the motor in the car so i think the rest of the motor GB will slide out from the bottom.

Cheers guys

 

definitely use a lift if possible. easiest way is to take out TC, leave trans on, complete log block and drop it all. lift car outta the way and viola.... GL!!

 

Ok guys,

Got the motor out, Piston 4 has a chuck take from the side of it, so this was either caused by my new PTE injectors im getting them flow tested or when the Vacuum line blew off the FPR causing the car to run Lean 1 time...

Some Pics

Oh and thats the motor out with the gearbox in the car you can do it..











Cheers

 

So you took the head off before removing the motor? If so what points did you use to lift the block out?

 

I´ve taken the block from under the car, without the head. Perhaps he did the same thing.

 

Yeh Head off, then removed the block from under the car

 

I know you already got the motor out but for people doing a search or subscribed here's some more info on a thread I made

https://www.evolutionm.net/forums/ev...-head-off.html