im installing a custom 4 inch intake pipe to my gt35r,will the larger intake cause any problem?

 

Still using the stock maf?

 

yes...will it work?

 

Yes, and you might pick up a few HPs.

N

 

thanks alot!

 

and will i see changes in the AFR's? will it lean or rich?..and do i have to make any adjustments to my flash?

 

You will go leaner, but depending on your tune, may not be an issue, just monitor your afr's.

 

Also, how big is the inlet to your gt35?

 

4 inches...from the air filter to the turbo inlet.

and the turbo inlet is also 4 inches! its a gt3586r

 

The MAF will be the restriction in your intake now since the outlet is just over 3".

 

Just a heads up you may get some stalling at idle at times. Doesn't happen to everyone though

 

i'll find that in about 2 days from now, i'll post the results if it stalls or not.

 

Waste of time. The MAF is a 3" so no need for a 4" intake. Rip the MAF off and go SD and a 4" intake. You will prob gain close to 20whp just from doing that. Maybe more depending on boost levels.

If you need help setting everything up give me a holla

Mikey

 

sd ftw

 

sorry but can you please tell me what a SD is?
and im running a stock ecu with flash will SD work with it?