EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

2.4 Strokers and Cam Covers

Thread Tools
 
Search this Thread
 
Old Sep 21, 2011 | 01:38 PM
Share
  #16  
Spec-Ops1's Avatar
Spec-Ops1
Thread Starter
Account Disabled
iTrader: (38)
 
Joined: Jun 2010
Posts: 1,229
Likes: 1
From: Fayetteville,NC
Aight, got my Zaklee clear cam gear cover in today and I was able to get all 4 bolts in the cover by trimming the lower cover where the two bottom bolts feed through. Had to stretch the cover a bit on the back lower bolt to get it to line up but it fits and no rubbing....
Reply
0
Old Sep 21, 2011 | 02:42 PM
Share
  #17  
ta ace's Avatar
ta ace
Evolving Member
iTrader: (22)
 
Joined: Jun 2010
Posts: 411
Likes: 0
From: wichita, KS
Originally Posted by Freddie@Spec-Ops
Aight, got my Zaklee clear cam gear cover in today and I was able to get all 4 bolts in the cover by trimming the lower cover where the two bottom bolts feed through. Had to stretch the cover a bit on the back lower bolt to get it to line up but it fits and no rubbing....
NO RUBBING good lol the stock one rubs i found out the hard way... timing belt in the first 100 miles lol it put a slit in it so i replaced it just incase lol
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
How To: Evo 9 cam install, MIVEC
fireroasted
Evo Engine / Turbo / Drivetrain
20
Mar 27, 2017 08:17 AM
Evo 8 Timing/Cam Cover Bolts - What Size?
rogerlam
Evo General
2
May 12, 2016 04:56 PM
06 ralliart timing timing/valve problem
watchman24
04-06 Ralliart Engine/Drivetrain
5
Aug 5, 2014 08:13 AM
2.4l swap for wrecked evo.
Jabu
Evo Engine / Turbo / Drivetrain
5
Feb 7, 2012 02:02 PM
How to change the Valve Cover Gasket on 2.0L Lancer 4G94
Lumpy
Lancer How Tos / Installations
0
Dec 18, 2007 01:51 PM
Tags
Back to Subforum
Evo Engine / Turbo / Drivetrain
View Next Unread
Advice for my setup




Advanced Search

All times are GMT -7. The time now is 02:10 PM.