Is there any easy way to remove the flywheel without it turning? I know they sell a special tool that has a hole on each end that bolts onto the housing and flywheel to hold it in place but I can't find it online.

 

Impact gun!

 

+1 on impact gun, or drill 2 holes out on sheet metal to match up to the bolts on the flywheel to block or crank

 

or if you dont have an impact gun, have someone use a breaker bar for leverage on the crank pulley side!!

 

I will try the impact wrench. If not the other method.

 

i'm glad you decided to take on the challenge!! good stuff bro

 

I use this flywheel Turner. Awesome tool for a lot of uses.
http://buy1.snapon.com/catalog/item....re&dir=catalog


Posted from Evolutionm.net App for Android

 

impact gun. or beer, a friend, prybar, breaker bar ect...

 

Just changed clutch last weekend not a fun job but also not that bad to do! impact gun taking them off then pry bar used to tighten.

 

I had my buddy hold a crow bar in the teeth.

Worked great.

 

matco 1/2" electric impact ftw. Zapped off the bolts in a matter of seconds.