Hks 272 vs kelford 272 for ix
Hks 272 vs kelford 272 for ix
Hi, what hp/torque gain I could expect between these 2 cams setup, I already have HKS installed on my car... Is there's a comparison somewhere for IX cams? Whats the best bang for the buck ?
Thanks
Thanks
https://www.evolutionm.net/forums/ev...-cam-test.html
hks and kelford are probably the best rated street cams. check link out !
hks and kelford are probably the best rated street cams. check link out !
https://www.evolutionm.net/forums/ev...-cam-test.html
hks and kelford are probably the best rated street cams. check link out !
hks and kelford are probably the best rated street cams. check link out !
In fact, what I heard was out of a test of all the 272 cams for Evo 4G63s HKS was last, next to last was Brian Crower 272s. And I know that because my car has BC 272s in it....lol. GSCs were either 1st or 2nd.
Trending Topics
I have an evo 8 and I just went from hks 272's to the gsc s2 cams and I gained 17whp on a 91 octane 22psi of boost tune. The only thing that was changed was the cams. Both tunes are on 91 octane and at 22psi. Set up is a htsgt3582r with all the bolt ons and supporting mods on a stock engine block.
387 whp with the hks 272's on 91 octane at 22psi. The 426whp run was done on 100 octane at 25psi of boost

404whp with the gsc s2 cams on 91 octane at 22psi
387 whp with the hks 272's on 91 octane at 22psi. The 426whp run was done on 100 octane at 25psi of boost

404whp with the gsc s2 cams on 91 octane at 22psi
Last edited by riceball777; Nov 20, 2012 at 11:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
WTB[MidWest]: Hks 272 intake cam
evolved8 bs
For Sale/WTB - Engine / Drivetrain / Power
3
Nov 29, 2015 09:55 PM







