Hey guys,

My AGP LICP is constantly popping off. From what I've read this is a common issue with aluminium pipes, is there anything I can do to stop it?

thanks

 

Shouldnt be common with a good coupler and T-bolt clamps. If you dont have T-bolts, you should def invest in them. Regular worm gear clamps wont cut it when the boost goes up

 

I agree with Black Beauty^^^ My ETS licp popped off on me one time on the road and I had to pull over at a Walgreens and buy a cheap *** screwdriver to get it back on in the parking lot. After that I bought some ETS T-bolt clamps and tightened the hsit out of it with a socket. Hasn't moved since!

 

I was having the same issue above 15psi. Tbolts are a good investment

Off subject, why the name 'govno' LOL

 

I'll give the clamps a go. My tuner who installed it was saying you can't clamp these LICP's and it's popping off due to a ****ty design (necks off on an angle).

Govno as in sranje bro, you know that.

Nice DP

 

Seronja

 

tbolt clamps should solve your problem just be careful tightening them on aluminum. if you go to far youll crush it

 

before clamping spray cheap hair lacquer around the end of the pipe.

 

+1 on the hair spray if its still giving you problems