Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

4g64 Block Power Steering Brackets

Thread Tools
 
Search this Thread
 
Old Apr 15, 2013 | 07:31 PM
  #1  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
4g64 Block Power Steering Brackets

Hey guys. I have searched for some information on what to do with my power steering pump bracket for my 4g64 build and havent came up with much. The Evo bracket will not line up right. What are the 4g64 guys doing about this. Using 4g64 bracket? Will it work? Do I have to make a custom bracket? Any info would be appreciated. Thanks in advance.
Reply
Old Apr 16, 2013 | 04:18 PM
  #2  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
Anyone?
Reply
Old Apr 17, 2013 | 05:42 AM
  #3  
evolve_VIII's Avatar
Evolving Member
iTrader: (11)
 
Joined: Dec 2007
Posts: 456
Likes: 2
From: michigan
Im searching for the same information. If you find it, please post in my thead.

https://www.evolutionm.net/forums/ev...evo-8-9-a.html
Reply
Old Apr 17, 2013 | 06:35 AM
  #4  
batty200's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jan 2005
Posts: 2,203
Likes: 5
I have a 4G64 and I will look at the brackets on Sunday if you still need the info. I Hahahaace both what was in the EVO functioning and the stock 64 brackets. I didn't assemble my engine originally so I never took notice that it didn't use the stock stuff.
Reply
Old Apr 22, 2013 | 08:12 AM
  #5  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
Originally Posted by batty200
I have a 4G64 and I will look at the brackets on Sunday if you still need the info. I Hahahaace both what was in the EVO functioning and the stock 64 brackets. I didn't assemble my engine originally so I never took notice that it didn't use the stock stuff.

Did you ever get a chance tolook at the bracket?
Reply
Old Apr 22, 2013 | 09:53 AM
  #6  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
I just bolted up my stock accessory brackets last nite. They fit fine.

From what year/make/model is your block? Do you have a picture of the non-fitment?
Reply
Old Apr 22, 2013 | 12:22 PM
  #7  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
Originally Posted by ExViTermini
I just bolted up my stock accessory brackets last nite. They fit fine.

From what year/make/model is your block? Do you have a picture of the non-fitment?

I dont have a picture at the moment. The two long bolts that bolt in on the front of the block fit fine. The two short ones that bolt in through the side are not lined up. The block is from a galant. Not sure the year. It was an 8th gen.
Reply
Old Apr 22, 2013 | 12:31 PM
  #8  
galantman03's Avatar
Evolving Member
iTrader: (7)
 
Joined: Sep 2010
Posts: 301
Likes: 0
From: WEST SIDE, SD
I have a galant, and my build is using all evo 8 timing compenents and power steering pump, bracket and all. Trust me it bolts right up. The only thing that doesn't line up is the timing cover itself, for the power steering bracket cutouts
Reply
Old Apr 22, 2013 | 01:09 PM
  #9  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
What mount bracket are you using?
Reply
Old Apr 22, 2013 | 04:26 PM
  #10  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
I'm using the bracket off of my evo. Only 2 bolts line up.
Reply
Old Apr 22, 2013 | 04:45 PM
  #11  
04slowevo's Avatar
Evolving Member
iTrader: (17)
 
Joined: Mar 2009
Posts: 144
Likes: 0
From: Hinesville, GA 31313
Stock brackets for me on my 2.4L.
Reply
Old Apr 22, 2013 | 05:07 PM
  #12  
Honto's Avatar
Evolving Member
iTrader: (34)
 
Joined: May 2007
Posts: 125
Likes: 0
From: NJ
Stock brackets for me also on the 2.4, if you take a picture of how it's wrong I could probably post a pic on how it should be.
Reply
Old Apr 22, 2013 | 07:23 PM
  #13  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
Ok I will try to take some pictures when I get off of work in the morning. Thanks guys.
Reply
Old Apr 23, 2013 | 04:03 AM
  #14  
buford's Avatar
Thread Starter
Newbie
 
Joined: Feb 2010
Posts: 15
Likes: 0
From: Gonzales, LA
No pictures needed guys. It turns out I wasn't using the evo bracket. It must be a 4g64 bracket. I found the evo bracket and it fits perfect. Thank you guys for yalls help. It was my mess up. Sorry. Had a noob moment I guess.
Reply
Old Apr 23, 2013 | 04:58 AM
  #15  
ExViTermini's Avatar
Evolved Member
iTrader: (25)
 
Joined: Jan 2005
Posts: 1,761
Likes: 13
From: Virginia
Happens to the best if us, glad it's resolved!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
darkmitsu
Lancer Engine Tech
282
Feb 27, 2024 01:31 PM
turbotsi
Lancer Engine Tech
4
Feb 4, 2013 06:08 PM
Alchem1st
Evo Engine / Turbo / Drivetrain
14
Sep 20, 2011 04:27 PM
bvasquez12
Lancer Engine Tech
46
Aug 14, 2010 09:46 AM
01sleeper
Evo Engine / Turbo / Drivetrain
3
Feb 15, 2006 07:44 PM




All times are GMT -7. The time now is 04:58 PM.