Hello all, i am in need of help in installing my fuel pressure gauge. I have a autometer gauge and i need help adding my sensor on the fuel system. I know its not the best way to install it but i went with the "T" method which cuts the fuel line and putting a T in it.

Now my question is where would i make the cut? Any help is appreciated!!

Here is what the setup looks like

 

What kind of FPR do you have? Usually there's a place on there for a gauge

 

The fuel pressure gauge sensor would be added to the feed line. Or if you have an aftermarket fpr, as "lostsoulsevo" said, there is a place on there.

 

No i have a stock fpr

Yeah i dont have a afpr . But do you know where the feedline is? Or the location.. I really dont want to cut the wrong line lol

 

The line that bolts on to your fuel rail.

 

The line before or after the fuel rail? Do you have a picture location of the place to cut?

 

Can anyone please help me? Do I cut the line left (passenger) side or right (driver) of the fuel rail? Or does it matter? Please help

 

the feed is on the driver side. its the hose that is directly connected to the fuelrail on the driver side