When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
did they mention anything about the turbine housing? is it mhi or some chinese foundry brand?
Interesting question. I was assuming an MHI housing because so far, all the aftermarket TS hotside housings have not stood up to any abuse. However, maybe they have found a good vendor. Still, they need a CHRA as well, and since they don't have a core charge for their turbos, my guess is that its all MHI-based.
Interesting question. I was assuming an MHI housing because so far, all the aftermarket TS hotside housings have not stood up to any abuse. However, maybe they have found a good vendor. Still, they need a CHRA as well, and since they don't have a core charge for their turbos, my guess is that its all MHI-based.
yes, i am thinking it is an aftermarket housing as well.
Here is some pictures of the new Blouch Dominator 3.0 XTR. This version does not have the 3'' anti-surge compressor housing. I figured I would share instead of lurking for once. I would also like to thank Nate at MAP for all of his help getting me this turbo and answering all of my questions. I am excited to see what it can do.
Here is some pictures of the new Blouch Dominator 3.0 XTR. This version does not have the 3'' anti-surge compressor housing. I figured I would share instead of lurking for once. I would also like to thank Nate at MAP for all of his help getting me this turbo and answering all of my questions. I am excited to see what it can do.
nice- what mods will this turbo be paired with? can't wait to see the results...
