Hi everyone I did a clutch and flywheel last weekend. About 10 minutes after the job I made a very sllow u turn (5mph) in a parking lot when I heard a "bunk" sound. I got under the car to check it out and didn't see anything out of the ordinary. Fast forward to today. After I fuel up at the gas station I hop in my car and go to inch away from the pump. Only to roll about three inches and feel lsomthing bind up. The best way to describe it is when an automatic car is in park without a parking break on, it can roll but hits a stop and kinda springs back. So I put it in reverse, same thing rolls about 6 inches then binds. I then roll forward and I guess powered through what ever was bound op and heard that same "bunk" pop noise. Drove the car home no other weird noises or whining. Putting the car up right now and pulling the transfer case to see what's up, thinking its ring and pinion on the front diff. Anything I should keep an eye out for? Edit 2005 gsr 5 speed acd
Ring and pinion looks good through sight window. Nothing to raise alarm in the oil.
