boost leak test question
#1
Newbie
Thread Starter
boost leak test question
hey i did a boost leak on my car and i found a found a few leaks.
- J pipe was leaking but i had a new gasket with my evo 9 turbo swap kit(waiting untill i get the 10.5 hotside)
-first cupler off intake manifold coudnt hold up
--both fixed
-throttle body shaft is pissing air like theres no tomorrow
-and the last is what would normally be the idle air screw(in other cars).. is it the same on a evo? and i guess there is a gasket in it?
happens to be the red # in the pic .. and im guessing the second(lower) red item is the gasket?
- J pipe was leaking but i had a new gasket with my evo 9 turbo swap kit(waiting untill i get the 10.5 hotside)
-first cupler off intake manifold coudnt hold up
--both fixed
-throttle body shaft is pissing air like theres no tomorrow
-and the last is what would normally be the idle air screw(in other cars).. is it the same on a evo? and i guess there is a gasket in it?
happens to be the red # in the pic .. and im guessing the second(lower) red item is the gasket?
#2
EvoM Guru
iTrader: (1)
Yes, there is on o-ring on the idle screw. And you can get upgraded tb shaft seal from mil.spec or STM. They're both vendors on here.
The following users liked this post:
Cbr1000love (Mar 25, 2016)
Thread
Thread Starter
Forum
Replies
Last Post
aspensvt16
Evo How Tos / Installations
1
Aug 10, 2008 04:35 PM
dudical26
Evo Engine / Turbo / Drivetrain
26
Jul 25, 2007 02:25 PM
MitsuJoe
Evo Engine / Turbo / Drivetrain
5
Nov 19, 2006 04:21 PM