Start problem
#1
Newbie
Thread Starter
Join Date: Sep 2017
Location: San Lorenzo
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Start problem
I make my new motor and I have a problem is a stroke 2.3L
I start it and is fine but then I sart it and when I shut off the car and try to start again the evo dont start I have to take out the injector plug and crank the car then connect back the injector and then it start but every time I shut off the car make the same problem. .
Can someone help me.
I start it and is fine but then I sart it and when I shut off the car and try to start again the evo dont start I have to take out the injector plug and crank the car then connect back the injector and then it start but every time I shut off the car make the same problem. .
Can someone help me.
#2
EvoM Community Team Leader
You probably need tuning, but your going to need to provide a lot more details about your car, your symptoms, and any recent work you have had done before anyone is going to be able to provide you any meaningful advice.
#3
Newbie
Thread Starter
Join Date: Sep 2017
Location: San Lorenzo
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Fic 1450cc injector
Walbro 450
Map sensor 4bar
regulator malpassi
Piston JE
Eagle rod
T4 6564 turbo
Custom camshaft
Thats some of the mod on the car
The problem is that the car star fine the first tiem I start after mount the new motor then the car start but have like problem when acelerate then when I shut off the car and try to start again the car only crank I only discconect the injector plug and start crank again the car start and fast shut off then I connect the injector back and the car start but having problem.
Im thinking is the crankshaft but I want to be sure.
#5
EvoM Community Team Leader
find a new shop/tuner. Also is it throwing any OBD codes?
Thread
Thread Starter
Forum
Replies
Last Post
bigturboevo80
Evo General
35
Jan 1, 2011 04:26 AM
Braydo25
Motor Sports
7
Jul 14, 2010 11:56 AM
geevolution
Evo Engine / Turbo / Drivetrain
7
Dec 31, 2009 05:31 PM