2.3L 6466 E85 blue smoke when you blip throttle at decel and at idle
#1
Newbie
Thread Starter
iTrader: (8)
Join Date: Apr 2012
Location: Atlanta, GA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
2.3L 6466 E85 blue smoke when you blip throttle at decel and at idle
Hey guys, just trying to see if anybody has had a similar issue. When cruising or after wot and the car decels, When i get back on the throttle I have a blueish /white smoke coming out the exhaust. Also during cold start it does it intermittently and goes away. Not sure if its from condensation though or cause of e85. I have about 1500 miles on this new build including turbo kit. Car pulls great, compression test results came back as 162,160,160,160. Leak down at 6%,8%,6%,7%. Just didn’t know what else I should be checking for.
Build List :Kiggly HLA
GSC S3
Supertech Inconel Exhaust +1mm
Supertech Black nitride Intake +1mm
Supertech Valve Guides and seals (standard)
GSC beehive valve springs with Ti Retainers
ARP cam tower bolts
ARP Cam Sprocket bolts
GSC Zero Tick Lifters
Fluidampr Crank
Manley 100mm Billet Crank
Wiseco 1400HD 85.5 Pistons .020 oversize 9:1
Manley Turbo Tuff W/ ARP 625+
OEM MLS gasket
ARP 625+ aged headstuds
ACL Bearings
Sheepey Forward Facing 6466 Gen 2 V Band Kit
-3an feed line with no extra restrictor just the one that comes with the 6466 and a -10an drain
Full titanium exhaust from the turbo back
Sheepey Catch Can kit with I believe -8 and a -6 line
Here are some videos and thanks in advance!
https://youtu.be/aWX38fyZjR8
https://youtu.be/3-1nuTnJTWs
https://youtu.be/TKSxbpEHBwc
Build List :Kiggly HLA
GSC S3
Supertech Inconel Exhaust +1mm
Supertech Black nitride Intake +1mm
Supertech Valve Guides and seals (standard)
GSC beehive valve springs with Ti Retainers
ARP cam tower bolts
ARP Cam Sprocket bolts
GSC Zero Tick Lifters
Fluidampr Crank
Manley 100mm Billet Crank
Wiseco 1400HD 85.5 Pistons .020 oversize 9:1
Manley Turbo Tuff W/ ARP 625+
OEM MLS gasket
ARP 625+ aged headstuds
ACL Bearings
Sheepey Forward Facing 6466 Gen 2 V Band Kit
-3an feed line with no extra restrictor just the one that comes with the 6466 and a -10an drain
Full titanium exhaust from the turbo back
Sheepey Catch Can kit with I believe -8 and a -6 line
Here are some videos and thanks in advance!
https://youtu.be/aWX38fyZjR8
https://youtu.be/3-1nuTnJTWs
https://youtu.be/TKSxbpEHBwc
#3
Newbie
Thread Starter
iTrader: (8)
Join Date: Apr 2012
Location: Atlanta, GA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I called PTE and was recommended to install a turbosmart pressure regulator. I ordered the new precision full flow drain fitting and may try a restrictor for now to see how it goes.
#4
EvoM Guru
iTrader: (1)
Put a .030" restrictor in the turbo feed line.
Thread
Thread Starter
Forum
Replies
Last Post