www.o2simulator.com $30 bux shipped! in 3 days you will receive o2 sim in mail....

What i did:

1) remove passanger side seat (4 screws) dont forget to remove rear center console (2 screws) there is an opening in carpet to get to rear o2 sensor.

2) you will find connector inside remove it, cut the white wire before the connector and connect it with white wire on the o2 sim, other end just leave it alone.

3) red/yellow wire color is +12, (splice connect with blue on o2 sim)

4) black is ground (no doh) (splice connect with black on o2 sim) thats all!

dont forget to disconnect your - terminal before installation, use electrical tape

thats all no more ce light (o2 sim led with blink every 10sec or so)

Hope this helps, later...

 

you already solved your awnser, otherwise if you decied to get your car tuned, you can have the tuner reprogram that particular cel out....

 

did that really work because I am about to do it. are you sure?

 

Thanks for the tip. I just ordered one.

 

I got no cat or anything and I don't get a CEL light, I have an o2 stimulator but I don't have any need for it now.

 

so that trick wont work with out that O2 part right? I will have to order it?

 

Did you get the dual or single output type?

 

single sir.

 

I put one of these on, still doesn't work, IDK what to do....