Look what I bought.
#1
Look what CAMS I bought.
Hi Guys
I've been wanting to install cams in my car for the longest time. I've considered both the HKS 272s and Tomei 260s. The Tomei cams comes with a higher lift but less duration. I hate making sacrifices. Anyway, while on vacation in Singapore, I went to the Tomei Distributor here and bought a set of tomei procams and cam gears. The specs are as follows:
280 degrees Duration
11.5mm Lift (EX/IN)
These cams are not available in the US. Can't wait to get it installed in my car. I'm assuming I need to get springs and retainers too.
Ben
I've been wanting to install cams in my car for the longest time. I've considered both the HKS 272s and Tomei 260s. The Tomei cams comes with a higher lift but less duration. I hate making sacrifices. Anyway, while on vacation in Singapore, I went to the Tomei Distributor here and bought a set of tomei procams and cam gears. The specs are as follows:
280 degrees Duration
11.5mm Lift (EX/IN)
These cams are not available in the US. Can't wait to get it installed in my car. I'm assuming I need to get springs and retainers too.
Ben
Last edited by RoyalJelly; Aug 3, 2004 at 08:11 AM.
#2
Evolving Member
iTrader: (15)
Join Date: Dec 2003
Location: San Diego, CA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
they are available in the US. You get it from Tomei's distributor here. www.aebsracing.com
And those are tomei's monster full out drag cams...I was considering 270 myself...good luck with the 280s.
And those are tomei's monster full out drag cams...I was considering 270 myself...good luck with the 280s.
#4
Evolved Member
iTrader: (15)
Join Date: Jan 2004
Location: "Tri-Cities" WA
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Ya that is allot of duration. If you get a aftermarket turbo that will kill you on the overlap. But since you got the hookup im want to sell my HKS 272/272 cams and get some Tomei 260 with 11.5 if you can get them let me know and ill send the money.
#6
Evolved Member
iTrader: (15)
Join Date: Jan 2004
Location: "Tri-Cities" WA
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gnulooks
Yeah, if your still there bring me a set too. Maybe 2k4evo and I can get a better deal for buying two sets...
#7
Hi guys
I'm actually leaving tomorrow. Ths cams here were not cheap. I paid an equivilant of about $850 for both cams. The 260 cams r a little cheaper at about $680 for both IN and EX. The cam gears, i was told was just released. Blue and red. Thats cost about 350 a set. I don't know if i have time to swing by 2morrow. If I knew that AEBS sold these cams, I'll probably buy it over there.
I'm now thinking of buying a stage 3 head from Buschur. What do u guys think?
Ben
I'm actually leaving tomorrow. Ths cams here were not cheap. I paid an equivilant of about $850 for both cams. The 260 cams r a little cheaper at about $680 for both IN and EX. The cam gears, i was told was just released. Blue and red. Thats cost about 350 a set. I don't know if i have time to swing by 2morrow. If I knew that AEBS sold these cams, I'll probably buy it over there.
I'm now thinking of buying a stage 3 head from Buschur. What do u guys think?
Ben
Trending Topics
#8
Evolved Member
iTrader: (15)
Join Date: Jan 2004
Location: "Tri-Cities" WA
Posts: 1,493
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RoyalJelly
Hi guys
I'm actually leaving tomorrow. Ths cams here were not cheap. I paid an equivilant of about $850 for both cams. The 260 cams r a little cheaper at about $680 for both IN and EX. The cam gears, i was told was just released. Blue and red. Thats cost about 350 a set. I don't know if i have time to swing by 2morrow. If I knew that AEBS sold these cams, I'll probably buy it over there.
I'm now thinking of buying a stage 3 head from Buschur. What do u guys think?
Ben
I'm actually leaving tomorrow. Ths cams here were not cheap. I paid an equivilant of about $850 for both cams. The 260 cams r a little cheaper at about $680 for both IN and EX. The cam gears, i was told was just released. Blue and red. Thats cost about 350 a set. I don't know if i have time to swing by 2morrow. If I knew that AEBS sold these cams, I'll probably buy it over there.
I'm now thinking of buying a stage 3 head from Buschur. What do u guys think?
Ben
Thread
Thread Starter
Forum
Replies
Last Post
spoolme
For Sale - Engine / Drivetrain / Power
29
Nov 27, 2010 08:42 AM