evo 8

5 spd shifter base bushings and bolts
mr 6 spd trans temp sensor
acc. belt tensioner
front seat nuts and bolts

 

first of all what is this part circled in red? I tried looking for a evo 8 trans diagram but was unlucky so I figure I'd give this a shot (it's part of my trans/transcase but it keeps getting stuck not engaging all the way in all the time...any way to fix this?? Greatly appreciated in advance...

 

any pn# for the tc banjo bolt and washer ?

 

anyone?? does anyone know what that part is?? I don't even need a part number even guidance in the right direction would help....

 

anyone know the part number for the clip that holds the throttle position sensor to the electrical plug? It is a three sided metal retaining clip. Any help would be greatly appreciated!

 

Does anyone have the part number for the injector resistor box with harness? Thanks.

 

does anyone know if there is a seperate part number for the cylinder/screw thing thats under the silicone at the bottom of the mas air flow unit or is it a part of the mas. I guess you could call it the mas air adjustment screw like this one from a 2g mas. Its that little black cylinder at the bottom of the picture that goes up into the mas air sensor unit.
Thanks

 

Wow! This is really good information!!

 

need part # for the piece that fills the two holes in the bumper that I've boxed.



Thanks!

 

repost fail

 

im looking for the panel below the glove box that covers the harness. i cant find a number nor can the dealer. i never had it on my 06 but my friends 05 ssl did. any help?

 

I dont see anything separate from the dash assy in that area.

Can you email me a picture of the area and possibly a picture of what it supposed to be (if you can find one)?

(attach the image(s))
russellm@brucetitus.com

 

I am in need of the mitsubishi part number for the transmission mainshaft (output) outer bearing (driver side). This is the bearing with the snap ring groove.

Number on the bearing outer race: NTN SC06C44
Number on the cage seal: SC06C44LA

If Mitsubishi does not supply this, does anyone have a source?

 

hello, I drive a 2003GSR and i need to replace the front driver side fender liner.

What are the part numbers for the,
-fender liner (pic 1)
- another smaller liner (pic 2)
- fender plastic hardware kit for both front driver and passenger (pic 3)

 

Is there a code for rain guards?