Rubber front under lip on the MR's coming off?
#20
Evolving Member
iTrader: (7)
Join Date: Nov 2005
Location: Brooklyn, N. Y.
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Czubaka
Good point, I didn't think about the brake cooling.
Yeah, I was also in that group buy. At least you're not the last one to install it...
Yeah, I was also in that group buy. At least you're not the last one to install it...
Compare mine and this pic from Kamispeed's website:
Unfortunately, thanks to the instructions, it just tells you to put it together, but doesn't show you where to install it. So, I had to wait like two weeks until my friend's lift was free again.
For the rest that are interested in the panel, here's the link:
http://www.kamispeed.com/product_inf...fde925bd6bd8bc
#23
Evolved Member
iTrader: (12)
Join Date: Jul 2005
Location: Westchester, NY
Posts: 1,404
Likes: 0
Received 0 Likes
on
0 Posts
What's a fender lip?? You guys are talking about a lip for the FRONT BUMPER, not fender. I've never heard of a fender lip besides the one inside the fender that people usually roll to accomodate wider tires.
#24
Evolved Member
iTrader: (12)
Join Date: Jul 2005
Location: Westchester, NY
Posts: 1,404
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fevo
took mine off , apprent it caught a rock on hi way and bent to a bad shape
#26
Originally Posted by SRT-TO-EVO
What's a fender lip?? You guys are talking about a lip for the FRONT BUMPER, not fender. I've never heard of a fender lip besides the one inside the fender that people usually roll to accomodate wider tires.
I just want to know if there would be any negative aerodynamic effect by using both the lip and the beatrush underpanel.
#27
Evolved Member
Join Date: Nov 2003
Location: Bangkok
Posts: 1,496
Likes: 0
Received 0 Likes
on
0 Posts
Mine's coming ooff first thing tomorrow. It's just too annoying.
Seriously, does it make much difference with it off?
^^ Took mine off just now. I didn't actually hit anything, trust me, but the thing was just hanging low.
Taking it off showed that the underpanel just sort of un-clipped itself. Pushing it back up does little cos the whol panel is just too floppy and the plastic clips are all pretty tired. I guess I could just replace them, but the whole thing looks pretty hopeless cos not only are the clips a little wore for wear, but the holes they go in are also pretty burred out.
It looks like the weight of the rubber/steel strip just makes the situation worse. I mean, the undertray is just about enough to support its own weight, let alone have something stuck right at the end of it. I could just readjust the thing, but I'll just have to do it again in a couple of weeks.
So, I'm getting a beatrush underpanel and a do-luck front lip.
Anyone had any scrapes with the front lip? is it better/worse than the rubber lip? I'm on stock ride height (and always will be). Thanks.
Seriously, does it make much difference with it off?
^^ Took mine off just now. I didn't actually hit anything, trust me, but the thing was just hanging low.
Taking it off showed that the underpanel just sort of un-clipped itself. Pushing it back up does little cos the whol panel is just too floppy and the plastic clips are all pretty tired. I guess I could just replace them, but the whole thing looks pretty hopeless cos not only are the clips a little wore for wear, but the holes they go in are also pretty burred out.
It looks like the weight of the rubber/steel strip just makes the situation worse. I mean, the undertray is just about enough to support its own weight, let alone have something stuck right at the end of it. I could just readjust the thing, but I'll just have to do it again in a couple of weeks.
So, I'm getting a beatrush underpanel and a do-luck front lip.
Anyone had any scrapes with the front lip? is it better/worse than the rubber lip? I'm on stock ride height (and always will be). Thanks.
Last edited by x838nwy; Jun 5, 2006 at 08:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Evo__Lee
Evo General
13
Oct 4, 2018 10:23 PM
Foggy
EvoM New Member / FAQs / EvoM Rules
5
May 27, 2007 08:37 PM