Varrius

iTrader: (1)

I'm looking into getting a Seibon OEM Style CF Hood for my evo. But on the 9s, the sprayer tank is located in the trunk, so the wiper sprayers are routed differently. Are there those little clips on the underside of the hood to guide the hose on? If not how do you guys route the sprayer hoses? Secondly, are the wiper sprayers hard to remove?

avengerhed

iTrader: (13)

On all USM Evos the windshield washer reservoir tank is mounted in the truck. You should have no problem with the washer tubing routing...I'd be more concerned with the fact that the VIIIs have a pointed hood and the IXs are flat at the front...

Varrius

iTrader: (1)

My IX hood is identical to my Evo 8s hood. . .

avengerhed

iTrader: (13)

I apologize then, I guess i was thinking of the Evo 7's hood which is not pointed at the front. So, If you have an VIII how did you not know that the windshield fluid is in the back?

Varrius

iTrader: (1)

I only have a 9. I had an 8 back in 03. I was thinking of the front intercooler sprayer resevoir on the 8s. That little black thing to the right, I thought that was the sprayer.

avengerhed

iTrader: (13)

Gotcha, it looks like you should be all set then...good luck!

gsrboi80

iTrader: (38)

All windshield sprayers are in the trunk VIII and IX. 03-04 had the IC sprayer under the hood. Evo VIII and IX hoods are totally interchangeable. FYI

Varrius

iTrader: (1)

So are the sprayer nozzles easy to clip off?

MREvOTard

iTrader: (3)

is it true the cf hoods weigh more or same compared to stock?

tirbolag9

might wanna check with seibon. i've seen some CF hoods requiring to drill out the hole for the spray nozzles. as for spray nozzles on the stock, not sure but i'll chime in once i check it.

Varrius

iTrader: (1)

I know for a fact they have the wiper holes all ready. I was asking though, is it easy to remove the STOCK nozzles.

Varrius

iTrader: (1)

It weighs nearly the same, however, carbon distributes the weight more evenly.

chaotichoax

iTrader: (149)

The hood does have holes but they are NOT punched out for you. My buddy had to punch his out they just outline the cut.

Spitz

https://www.evolutionm.net/forums/sh...bon+fiber+hood

Some cf hoods might weigh more than OEM. Make sure it's lighter before you buy.

Varrius

iTrader: (1)

Do you know if it was difficult or did he just push them out easily? Secondly, when he installed it was it easy to remove the stock hoods sprayer nozzles?