I'm trying to understand what you meant by getting around the immobilizer, with this system i just said, you wouldnt have to bypass the immobilizer, right? because the key is being used. The wiring sounds simple enough, although if i cant figure out from the instructions, i'll have a friend who does electrical work help me.... Thanks for the help guys...

 

If you want to forego inserting the key, you'll need an immobilizer bypass. They cost about 20 bucks.

Otherwise, if you use the key you'll be fine.

Wiring this up is very very simple.
There is a starter wire.
There are 2 scenarios:

No more starting with the key:
You can cut the starter wire and send the car-side wire to your switch. Splice into the constant wire and send that to your switch. When you push the switch/button it closes the connection and the constant and the starter wire.

Start as normal as well as with the starter button.
Follow the same procedure but do not "cut" the factory starter wire. Simply splice into it.

 

I would just install a remote start and call it a day...

 

If you don't know how to change your oil your a retard or just a lazy rich person.