Stock Seatbelt Bolts
Thread Starter
Evolving Member
iTrader: (14)
Joined: Feb 2006
Posts: 305
Likes: 0
From: Westchester, NY
Stock Seatbelt Bolts
I bought the car with a hanress bar and takata harnesses installed. I recently removed them and sold them. I need the bolts that hold the seatbelt to the B pillar of the car, top and bottom. I also need the hardware that attaches the receiver end of the seatbelt (where you put the buckle in) to the seat. Thanks
The dealership doesn't sell these separately so I would have to but the whole seatbelt assembly which is like $700. If anyone has these lying around, let me know and I will paypal ASAP. I really don't want to drive the car without seat belts.
The dealership doesn't sell these separately so I would have to but the whole seatbelt assembly which is like $700. If anyone has these lying around, let me know and I will paypal ASAP. I really don't want to drive the car without seat belts.
Last edited by mfr122887; Oct 11, 2007 at 07:57 AM.
From my experience,some junk yards really don't know what some cars have on them or what parts are really worth so if you can find those parts at a junk yard you may get a really good deal!
Thread Starter
Evolving Member
iTrader: (14)
Joined: Feb 2006
Posts: 305
Likes: 0
From: Westchester, NY
I found a junk yard near my school. I'll give them a call tomorrow, but I really doubt they will have an evo there. Any other mitsubishi's use the same mounting hardware?
Anyone here removed there stock seat belts and don't plan on ever using them again? Let me know.
Anyone here removed there stock seat belts and don't plan on ever using them again? Let me know.
Trending Topics
Thread Starter
Evolving Member
iTrader: (14)
Joined: Feb 2006
Posts: 305
Likes: 0
From: Westchester, NY
I didn't want to get pulled over and have to explain to the cop why I have harnesses in the car. I never go to the track so I really had no use for them. PS I bought the car with them.
Thread Starter
Evolving Member
iTrader: (14)
Joined: Feb 2006
Posts: 305
Likes: 0
From: Westchester, NY
seat belt bolts are a standard size, every car uses the same sized bolts, just order some bolts from www.sparcousa.com
I bought the car with a hanress bar and takata harnesses installed. I recently removed them and sold them. I need the bolts that hold the seatbelt to the B pillar of the car, top and bottom. I also need the hardware that attaches the receiver end of the seatbelt (where you put the buckle in) to the seat. Thanks
The dealership doesn't sell these separately so I would have to but the whole seatbelt assembly which is like $700. If anyone has these lying around, let me know and I will paypal ASAP. I really don't want to drive the car with seat belts.
The dealership doesn't sell these separately so I would have to but the whole seatbelt assembly which is like $700. If anyone has these lying around, let me know and I will paypal ASAP. I really don't want to drive the car with seat belts.
You don't want to drive with seat belts?? Why??
Just kidding with you. Actually cops don't always assume you race the car everywhere when you have harnesses in the car. Harnesses are 100% legal on the street, and on the track as long as they have their scheduled inspections completed. Harnesses are considerably more safe than those potential nooses that we wear across our necks each day.
Thread
Thread Starter
Forum
Replies
Last Post
neogeo64
09+ Ralliart How-To/Installations
1
Aug 7, 2017 04:45 PM
KevinD
Evo How To Requests / Questions / Tips
16
Feb 16, 2016 11:59 PM
SheWentToJared
Evo X General
53
Sep 5, 2015 03:45 PM





