Modification Regrets?
#1
Modification Regrets?
anyone put something on their car and wished they would've gotten a different brand,part, or just straight out never did the modification in the end?
for me it would be my clutch, i have really bad lock-out past 6500rpms and no matter what i cant change it. i wish i would have got a Exedy Twin disc instead. sad thing is i had the money at the time too... i dont know why i went with ACT
when i get my built trans, i will not hesitate to put a twin disc in. live and learn i guess
for me it would be my clutch, i have really bad lock-out past 6500rpms and no matter what i cant change it. i wish i would have got a Exedy Twin disc instead. sad thing is i had the money at the time too... i dont know why i went with ACT
when i get my built trans, i will not hesitate to put a twin disc in. live and learn i guess
The following users liked this post:
agthomps (Sep 5, 2016)
#3
Evolved Member
iTrader: (49)
No regrets with the Evo yet, although I did hate my GM BCS for a while before finally getting it all sorted out.
With my DSM I regretted the full set of poly Prothane motor-mounts and crappy GroundControl coilovers. With my S2000 I regretted getting the 4.57 rear end since the gears were so noisy (I should have done the quieter 4.57R or 4.56 gears).
With my DSM I regretted the full set of poly Prothane motor-mounts and crappy GroundControl coilovers. With my S2000 I regretted getting the 4.57 rear end since the gears were so noisy (I should have done the quieter 4.57R or 4.56 gears).
The following users liked this post:
Pawloo (Sep 22, 2016)
#5
EvoM Community Team
iTrader: (19)
I bought my car with a ton of mods on it (don't recommend it, but I got a super deal), and I have spent most of the time de-modding it. I have ripped out an electronic boost controller, re patched all the wires from the alarm that was put in, replaced the generic large FMIC with a stealth Perrin FMIC, got rid of the TurboXS exhaust.
I definitely do not recommend the turboXS exhaust to ANYONE. It is way too loud.
On that same note, It also has a turboXS blow off valve (vta). I absolutely hate this blow off valve. It is so loud. I look like a ricer and I drive an Evo ffs. If you're looking for a VTA blow off valve that is loud enough to wake the dead, TurboXS is your beast. Personally I'm going to the MR Diverter valve. I drove in an MR with one at English Racing, so much more sexy.
Other than that I'm pretty happy with what else is on there.
Btw, when i had my transfer case and transmission rebuilt by English Racing, I put an OEM clutch in, instead of the ACT that was in it. So much smoother and funner to drive.
I definitely do not recommend the turboXS exhaust to ANYONE. It is way too loud.
On that same note, It also has a turboXS blow off valve (vta). I absolutely hate this blow off valve. It is so loud. I look like a ricer and I drive an Evo ffs. If you're looking for a VTA blow off valve that is loud enough to wake the dead, TurboXS is your beast. Personally I'm going to the MR Diverter valve. I drove in an MR with one at English Racing, so much more sexy.
Other than that I'm pretty happy with what else is on there.
Btw, when i had my transfer case and transmission rebuilt by English Racing, I put an OEM clutch in, instead of the ACT that was in it. So much smoother and funner to drive.
The following users liked this post:
TheRippedNerd (May 11, 2021)
#7
Evolving Member
iTrader: (8)
the only thing i regret is buying a modded evo...now my car wasnt heavily modded but i spent the first 2 months getting the thing running right. i replaced upper intercoolr first because it was leaking. i went with ets and i love it. hated the forge BOV that was on it so i went with a IX MR and i love it except the semi stalling issue (hopeing it will go away with a tune) then i still had a fluttering issue and i put on a forge WGA and that finally did the trick. i just put on a ams licp and have no complaints with that either. now i just have to get this thing tuned bc it had a walboro 255 and it was flashed before i got it but its in need of a tune bad im getting horrible gas mileage and people cant drive behind me because its like raw fuel coming out of my exhaust haha but im doing hks 280s, head studs, head gasket, kevlar timing belt, waterpump and all assoc. pulleys and tensioners, and a ix turbo with tubular manifold. hopefully that stuff will be in next week so i can go get a tune and finally have this thing running good. so yea if i could do it again id buy a stocker
The following users liked this post:
TheRippedNerd (May 11, 2021)
Trending Topics
#8
EvoM Staff Alumni
iTrader: (149)
for me it would be my clutch, i have really bad lock-out past 6500rpms and no matter what i cant change it. i wish i would have got a Exedy Twin disc instead. sad thing is i had the money at the time too... i dont know why i went with ACT
when i get my built trans, i will not hesitate to put a twin disc in. live and learn i guess
when i get my built trans, i will not hesitate to put a twin disc in. live and learn i guess
The following users liked this post:
agthomps (Sep 5, 2016)
#13
Newbie
iTrader: (7)
Join Date: Jun 2008
Location: Panama City, FL
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I'm new to Evos, but I've been around race cars all the time. I've seen the same clutch in one car working perfect, work like crap in another. Sometimes its about the installation of it. A mechanic can get careless and not install it correctly and it will run like crap.