cory to answer you pm about the piping its all parts of it a complete kit

 

plan your build with out using e85 please if you cant get to regular stations then dont plan for it. i would say stick with the fp red and the list i posted look into it or pm me for sure. the bbk does its job as far as spool they have a new one coming out so you might want to look into that one instead but if we are doing this now then fp red. the fp black you really need a built motor to run that to its true potential. 35-40 psi before you see the blacks true power the red is great on 30psi.

 

does look had bad good luck

 

Great! PM sent...

 

On another note, I wanted to get an idea of the condition of my motor since the car has 72,000 miles. Also, I have not been able to drive the car or even run the motor due to the fact that the engine has many missing parts like piping, MAF, exhaust, etc.

Anyways, today I did a compression test on all four cylinders and had results between 177-180psi. Is that normal? I have done a few searches and haven't been able to find the range I should be in...

 

i was always told if its above 140 and basically even or rather close to one another from cylinder to cylinder then its good dont quote me on that could be wrong.

 

Well I was able to meet up with Jason (Cali2MDevo8) today and pick up some parts. They are still in the back of my GF's Tiburon until tomorrow, when I get back at the shop. I will post some pics then.

Heres a list of the parts I did get:

BBK Full Ported Turbo (Ported/Coated Hotside by Buschur Racing)
Megan Racing o2 Housing
GSC Catback Exhaust
Megan Racing Downpipe and Testpipe
ETS 3.5" Intercooler
ETS Black Intercooler Piping
Nisei Lower Intercooler Pipe
ETS intake with Perrin filter
Stock Exhaust Manifold (Ported/Coated by Buschur Racing)
Precision 680cc Injectors
Evo 9 DV

 

Back to the shop...Here are some pics of the parts.

 

i was wondering who basically bought everything he had. youre gonna love the bbk

 

Yeah, luckily I was able to catch most of the parts before they were sold. I am excited to get the car up and running.

 

Well I messed around with the car for a little bit tonight. I was able to get the manifold, turbo, exhaust, and intercooler mocked up...Just trying to get the parts I need to adapt this IX turbo to my VIII, then it should be very close to running!

Heres the progress...

 

cant wait to see more :]

 

Very nice man...looks like everything is coming together pretty nicely so far...Force-Fed Performance has a sale going on with Mishimoto Radiators and Thermostats if you are still looking for one...

https://www.evolutionm.net/forums/ev...hermostat.html

 

Subscribed.

 

Im glad i could help you two out and point you his direction while i was searching for parts for you like i been doing. Here you go

http://store.forcedperformance.net/m...Lancer-TurboHW

its more stuff then you need but it is a evo 8 to 9 install kit. You can sell the oil line to a a person that needs it using a fp red or green. OR keep it you might upgrade turbos later . I thought you were going to get his ported intake and 65mm throttle body?? YOu should pick those up. And the mishimoto raidaitor is a beast i have it and install was easy pm me if you want to see pics like you usually do keep me updated friend