vr4_rider

Hey, guys.

I am shopping around for some bluemax injectors.

Can anyone recommend me a site that has the best prices (and/or a vendor that have good prices)?

Thanks~!

asrdave

iTrader: (2)

stmtuned.com
extremepsi.com
maperformance.com
or
go straight to fic for their injectors

milford

iTrader: (18)

map

asrdave

iTrader: (2)

map is good cause anything over 99 dollars is free shipping
but i think stm is like that now too, anything over 200

vr4_rider

Thanks, guys.

I am considering these over regular PTEs or Delphis. I hear they are pretty good, but others have problems.

Time to search

binky

iTrader: (11)

Just an FYI, most of these fuel injectors are based off of bosch injectors and the individual companies may change them slightly and re-badge them.

However, with that said, I prefer the FIC's.


-Bink

EmeryatSTM

iTrader: (79)

Thanks for pointing him in our direction.

To the OP, I PM'ed you. If I can help let me know.


Thanks

-Em

vr4_rider

Hey, Em! Thanks for the PM buddy! I sent you one back

Drifting Away

iTrader: (6)

STM o MAP and i would go with ID's

vr4_rider

All this talk of high z or low z has be wondering what I should go with.

I want good idle and good cruise. I know the bluemax is supposed to satisfy those conditions better than the old injector version, but will the low z and high z give better idle and cruise? low z right?

Thanks!

binky

iTrader: (11)

FYI:

Low Z works with how your car sits now. If you go with high Z injectors you will need to bypass the resistor pack. You can either bypass it yourself - or a much better idea would be to buy spoolinup's high Z injector resistor bypass:

http://www.szabaga.com/store/resistor.html



-Bink

asrdave

iTrader: (2)

personally i would rather not have to bypass the injector resistor pack

vr4_rider

Hi, Bink. Thahnks for the reply. I am aware that you have to remove the resistor pack if you go high, and keep it if you go with low.

I just don't know why people go for high z. Once I understand why one would consider high z injectors, I will be able to make a better decision on why/why not I need high z injectors. Obviously, there's something about it that makes people go for it.

Thanks!