Buddy of mine has this banjo bolt fitting for his oil feed line off the head. He can't remember where he got it other than a motorcyle shop. Needless to say I've searched high and low and no luck. Anyone know where I can snag one??

 

http://www.atpturbo.com/mm5/merchant..._Code=ATP-FTG2


That is what you want.

 

http://www.streettunedmotorsports.co...evo_turbos.htm

 

you sure?

doesn't look anything like what I posted

 

Go to my link.

 

referring to this?

http://www.streettunedmotorsports.co...ine_90_end.htm


because thats a line. I already have a new line I'm just looking for that fitting basically

 

Down farther.

http://www.streettunedmotorsports.co...jo_fitting.htm

 

getting close.. its the banjo fitting.. but when it comes off with a 90 bend before it has the screw in portion.

 

why must you have the banjo and the 90* bend? the adapter is 100x simpler...

 

because it would smack the line into the tubular manifold.. and the 90* bend would allow the line less pressure/flex allowing better flow.