What size is the bango bolt that is pulled off of the block from the stock evo 9 turbo also where can i order one so i can run oil feed line thanks for your time guys.












im needing one of these

 

Should be M8x1.25

 

thank you ill check that out

 

I don't know what size banjo that is, but have you considered getting the gen 2 oil feed from buscher? If not check it out... If you're running anything more aggressive then a stock turbo (I'm guessing yes cause of your huge tube manifold) they found oil pressure can drops dangerously low at the head. Good luck finding that fitting and sorry couldnt be any more help.

 

thanks for the info

 

Buscher for sure

 

Modern Automotive Performance has a nice kit that taps into the oil filter housing where there is plenty of oil pressure.

 

m10x1.25

 

i second that.