How is the front lip mounted to the bottom of the front bumper on the Evo IX MR's? The driverside corner came undone and i dont see how its supposed to be held on. Is it just adhesive?

 

It's held on by a bunch of small tabs, if they break you just have to glue them. You could also used double sided tape to get it to hold, that or super glue! Here's a thread I found that had some ideas on what to do about the MR lips: https://www.evolutionm.net/forums/ev...lling-off.html

 

Thanks man, ill check out that thread. Seems like its either glue or double sided tape which unfortunatly don't seem like a permanant solution. Mitsubishi sure isnt the best with attaching parts to the body

 

I don't know about tabs my mine is held with around 12 screws. To remove you might as well take off the entire bumper (easiest way).

 

there is a small tab there, if you don't see anything, stick a screw through the bottom and call it a day

 

Jb weld the tabs back on and itll be stronger than when it came off the factory floor

 

I just jb welded mine and it is stronger. It set in 6 minutes and became welded on in about 30 min

 

Nothing like the good ol'busted lip on the Evo. I'm currently driving around with a busted lip. Next week I'll get either a CF or OEM replacement.