EGT Install Terminology Question

Reply Subscribe

Thread Tools

Search this Thread

May 26, 2005 | 04:23 PM

Solo Evo

Thread Starter

Evolving Member

iTrader: (7)

Joined: Jul 2004

Posts: 266

Likes: 0

From: Charlotte, NC

EGT Install Terminology Question

I have EvoMoto's directions, but I was wondering what a 1/8 NPT tap is. They say to drill the hole with a 8.3mm / 21/64" bit, but in the next step they say to break that out. Any idea what that is?

http://www.evomoto.com/tech_info.php...3_9&tech_id=15

Devin

May 26, 2005 | 05:12 PM

Solo Evo

Thread Starter

Evolving Member

iTrader: (7)

Joined: Jul 2004

Posts: 266

Likes: 0

From: Charlotte, NC

Bump, need to know soon

May 26, 2005 | 05:13 PM

Ninj0x

Evolving Member

iTrader: (3)

Joined: May 2004

Posts: 392

Likes: 0

From: California

You need to go to a hardware store and ask for it. It's a tool to make thread in metal. Good luck.

May 26, 2005 | 06:37 PM

EvoTech

Evolved Member

iTrader: (25)

Joined: Feb 2004

Posts: 1,424

Likes: 1

From: Long Island

You need the tap and the handle. Tapping threads is done by hand not with a drill. Any harware store can hook you up. Remember to go slow and clean off the tap often