I've searched here, I've looked in the manual -- I can't quite figure out how to get the glove box out. Any tips / directions would be greatly appreciated.

 

2 clips at each side, they are detachable

 

https://www.evolutionm.net/forums/sh...ad.php?t=75638

Tips:

* Empty out your glovebox before you remove it because when you remove it, it will flip upside down and dump out whatever is in the glovebox.

* The left (driver side) stopper pin could be a little frustrating to remove, especially if you have never done it before. Just take your time and feel it out. You'll find that you can pop it up and pivot it out towards the firewall. Just be patient.

* You may have to pivot it to the left a little bit and compress the right side of the glovebox slightly to clear the right (passenger side) stopper pin. It feels like you're going to break it, but it's quite flexible, and won't break so long as you don't pull on it too hard.

* When you pivot the box down, get ready to catch it with both hands so it doesn't come crashing down on the floor.

Good luck!

 

I found this very helpful when I did my shifter base bushing (a lot of pics):

http://www.norcalevo.net/forums/viewtopic.php?t=449

 

Thanks for the pointers, I'll give it a shot.
If anyone has any pics, that would be great too!
Sophis, thanks for the help, but that thread is about the center console, not the glove box. Did you post the right thread?
Thanks again.

 

Got it, thanks a lot all!
It was really easy, just needed to know what to look for.

Well, black Evo glove box for sale, new condition (the car's brand new) make an offer, you pay shipping. I'll post this in the for sale fourm too.

Thanks again.