Hello i am kind of new in this forum and sorry if i didnt post this in the right theme, but i have a big problem...i mounted engine to my evo and i forgot a little bit of where all the electronics and vacum hoses were installed, if anybody has any pictures of detailed motor mount i would be thankful alot!

 

Vac diagram is under the hood, on right side. All the Electrical stuff has colors inside the connectors. Match them up and your all done.

 

my entire car is painted on white, and i dont know where to look for vac, but ill find it not that much of a problem..i have a new one, i connected clutch and id doesnt work, it doesnt stiffness, its soft when u push it and pedal stays in, doesnt go back...do u know what the problem could be? thanks for connectors btw

 

Sound slike master slave cyl is either bad, or you have air in your clutch line. Need to bleed it and see again. Better if you have 2 people to do this.

 

About clutch ill try as u sayed and ill report to you how i did. thnx for pic

 

no problem, also make sure you fluid level is full, brake/clutch use the same holder. except for the clutch uses the fluid from the middle.

 

I purched a CD on line .."mitsu repair manuel". It really has helped me with alot of issues i have come accross. I bought it from Ebay

 

thanks im about to finish my build off, i just didnt know where to put all those vacum hoses hehehehe thanks alot!

 

I have more questions i hope im not too annoying

What fluid should i use in my Gearbox? it is 6 speed

and what fluid should i use in differential???

 

Th Stock Mitsubishi stuff is good.

 

That's the CASTROL TAF-X ?

 

http://www.maperformance.com/evo-vii...n-gear-fluids/

 

Hello, i have one more question..i have both rear lower arms broken..and i was wondering if anyone has OEM REAR LOWER ARMS for Sale??? they dont have to be new!! I Need them as cheap as possible. Please send me offers on PM

I need them for my Evo 8




Peace number 12 !!!

 

There is an upgrade to the stock one. Megan ($350), I think White Line also makes them (or maybe it just the bushings). Can Also Try Ebay Can be as low as $55 a piece. Post in the WTB section

 

i have no permission to post a thread in that theme...i dont need upgraded, just original and for the lowest price since my budget is going to the end