GSC Power-Division Cam Release!!!!!!
Originally Posted by berkel
Any dyno charts on the 264/272 yet?
I'd like to order this week, still leaning towards straight 264s though.
Thanks,
FB
I'd like to order this week, still leaning towards straight 264s though.
Thanks,
FB
EVO11V Should have his dyno results up soon.
Chris
I send it to Greg at GSC, I picked up about 30whp with the cams and hks intake, with out a tune. I'm nopefully in the next 2 weeks going to get a tune where I should pick up another 15-20whp. when he posts the graph you can see the a/f's were pretty bad so thats why the numbers arent as great as i expected.
But I can say I'm shocked that it did as well as it did on the dyno with such poor a/f's, especially uptop the a/f's were pegged at 10. The car feels amazing and there is definatly an increase on the top/mid end.
These are some great cams, I'll be giving you guys and update after the tune.
But I can say I'm shocked that it did as well as it did on the dyno with such poor a/f's, especially uptop the a/f's were pegged at 10. The car feels amazing and there is definatly an increase on the top/mid end.
These are some great cams, I'll be giving you guys and update after the tune.
Wow,
Still that rich with cams? That sounds awesome. No cam gears either?
Thanks for the PM, I'll hit you back in a sec.
The only thing holding me back from the 264/272 vs straight 264s is the emissions issue. I see you're in NJ, are you going to get cam gears to help with idle and whatnot, or do you think the tune will help enough? I believe the staggered set has a little more overlap and would probably have a slightly worse idle. I just don't want to pull them out to get the car smogged.
I'm also eager to see if the staggered set has earlier spool like the AMS test showed. Of course we won't have a back to back comparo, but I'd like to see how quickly your tq is ramping up. I've read a lot of the posts regarding the theory, but haven't seen a back to back dyno comparison (except the AMS test on a DSM). Also, I've seen a few people with straight 264s and no cam gears pass emissions, but not sure if 264/272 have already done the same.
Take care,
FB
Still that rich with cams? That sounds awesome. No cam gears either?
Thanks for the PM, I'll hit you back in a sec.
The only thing holding me back from the 264/272 vs straight 264s is the emissions issue. I see you're in NJ, are you going to get cam gears to help with idle and whatnot, or do you think the tune will help enough? I believe the staggered set has a little more overlap and would probably have a slightly worse idle. I just don't want to pull them out to get the car smogged.
I'm also eager to see if the staggered set has earlier spool like the AMS test showed. Of course we won't have a back to back comparo, but I'd like to see how quickly your tq is ramping up. I've read a lot of the posts regarding the theory, but haven't seen a back to back dyno comparison (except the AMS test on a DSM). Also, I've seen a few people with straight 264s and no cam gears pass emissions, but not sure if 264/272 have already done the same.
Take care,
FB
yeah no cam gears, the combo is great since you'll get more midend and top end then the strait 264's. The idle is fine, you probably wouldnt notice if I didnt tell you that i had cams although it is different a little loopy but very minimal. The spool is fine, i thought it got better. I noticed more power below 3k rpms and spool up is faster then it was before.
Definatly go with the 264/272's!
Definatly go with the 264/272's!
Originally Posted by berkel
Wow,
Still that rich with cams? That sounds awesome. No cam gears either?
Thanks for the PM, I'll hit you back in a sec.
The only thing holding me back from the 264/272 vs straight 264s is the emissions issue. I see you're in NJ, are you going to get cam gears to help with idle and whatnot, or do you think the tune will help enough? I believe the staggered set has a little more overlap and would probably have a slightly worse idle. I just don't want to pull them out to get the car smogged.
I'm also eager to see if the staggered set has earlier spool like the AMS test showed. Of course we won't have a back to back comparo, but I'd like to see how quickly your tq is ramping up. I've read a lot of the posts regarding the theory, but haven't seen a back to back dyno comparison (except the AMS test on a DSM). Also, I've seen a few people with straight 264s and no cam gears pass emissions, but not sure if 264/272 have already done the same.
Take care,
FB
Still that rich with cams? That sounds awesome. No cam gears either?
Thanks for the PM, I'll hit you back in a sec.
The only thing holding me back from the 264/272 vs straight 264s is the emissions issue. I see you're in NJ, are you going to get cam gears to help with idle and whatnot, or do you think the tune will help enough? I believe the staggered set has a little more overlap and would probably have a slightly worse idle. I just don't want to pull them out to get the car smogged.
I'm also eager to see if the staggered set has earlier spool like the AMS test showed. Of course we won't have a back to back comparo, but I'd like to see how quickly your tq is ramping up. I've read a lot of the posts regarding the theory, but haven't seen a back to back dyno comparison (except the AMS test on a DSM). Also, I've seen a few people with straight 264s and no cam gears pass emissions, but not sure if 264/272 have already done the same.
Take care,
FB
Originally Posted by Evo11V
post 63 is an idle video, idel sounds almost stock
Actually, my car sounds just like that now, with the slightl lope, maybe I already have cams, lol.
FB
Originally Posted by TalonRcR
Originally Posted by berkel
The only thing holding me back from the 264/272 vs straight 264s is the emissions issue. I see you're in NJ, are you going to get cam gears to help with idle and whatnot, or do you think the tune will help enough? I believe the staggered set has a little more overlap and would probably have a slightly worse idle. I just don't want to pull them out to get the car smogged.
Man... this sounds good. I just lost a "race" on the high end last night to another Evo (caymandiver) who has basically the same mods as me, except I've added IC piping and he's added cams. That made me finally decided to break down and get them. Rich, hopefully I'll see you at Mach V on sat and I can ask some ?s... I'll be there like around 3 or 4 or so. You going?
Originally Posted by SterlingEvo
Man... this sounds good. I just lost a "race" on the high end last night to another Evo (caymandiver) who has basically the same mods as me, except I've added IC piping and he's added cams. That made me finally decided to break down and get them. Rich, hopefully I'll see you at Mach V on sat and I can ask some ?s... I'll be there like around 3 or 4 or so. You going?







