very nice indeed!

the lower portion is going to look very similiar because we're using the oem hvac controls like you did. the upper bezel is different because the lines follow the two dins.

also, i don't know if you used fiberglass or not, but ours is injection molded abs plastic.

great work!!

 

i used my original center console and trim it and fiberglass it. are you selling the kit in a set? would you sell them in seperate pieces just the upper or lower portion?

 

Please add me to the PM when it's ready list.

Thanks.

 

+1

 

that wouldnt be a problem at all. just let me know what you need when the time comes (hopefully very soon!!) and i'll take care of you. if you want, add your name to the GB and indicate the part you need beside your name so i remember.

thanks!!

 

1. platinumspecv
2. Evovette
3. zstryder
4. marmutz
5. digital509
6. wiz
7. mike1023
8. tama_mog
9. Bom's Evo
10. yellowevo21
11. alby988
12. en1gma19
13. 05evo
14. GotLeon
15. BANKS
16. DANERS_03
17. edtxag
18. slowevo4me
19. 04WWRS
20. greenpsycho
21. RedAustinIX

AND as for the PM me when its ready list:

1. NocturnalEVO
2. edtxag
3. jonpfive
4. northernevo
5. mike@forge
6. CRVdrftR05
7. EVOking8
8. Eggy
9. Reine
10. vanisher
11. GootBoost

 

im not on ur list

 

lol, i'm sorry. i didn't mean to overlook you.

1. platinumspecv
2. Evovette
3. zstryder
4. marmutz
5. digital509
6. wiz
7. mike1023
8. tama_mog
9. Bom's Evo
10. yellowevo21
11. alby988
12. en1gma19
13. 05evo
14. GotLeon
15. BANKS
16. DANERS_03
17. edtxag
18. slowevo4me
19. 04WWRS
20. greenpsycho
21. RedAustinIX

AND as for the PM me when its ready list:

1. NocturnalEVO
2. edtxag
3. jonpfive
4. northernevo
5. mike@forge
6. CRVdrftR05
7. EVOking8
8. Eggy
9. Reine
10. vanisher
11. GootBoost
12. M00kiE

 

good news!!

the bezel is going to be done ahead of schedule. we're expecting the mold to be ready by this evening, so tomorrow it's going out for mass-production.

once i hear from our manufacturer, i'll open up the pre-orders for everyone.

 

pics of new setup?

 

not until we have the final production piece installed.

 

1. platinumspecv
2. Evovette
3. zstryder
4. marmutz
5. digital509
6. wiz
7. mike1023
8. tama_mog
9. Bom's Evo
10. yellowevo21
11. alby988
12. en1gma19
13. 05evo
14. GotLeon
15. BANKS
16. DANERS_03
17. edtxag
18. slowevo4me
19. 04WWRS
20. greenpsycho
21. RedAustinIX
22. BoOsTinGEVO190

AND as for the PM me when its ready list:

1. NocturnalEVO
2. edtxag
3. jonpfive
4. northernevo
5. mike@forge
6. CRVdrftR05
7. EVOking8
8. Eggy
9. Reine
10. vanisher
11. GootBoost
12. M00kiE

 

1. platinumspecv
2. Evovette
3. zstryder
4. marmutz
5. digital509
6. wiz
7. mike1023
8. tama_mog
9. Bom's Evo
10. yellowevo21
11. alby988
12. en1gma19
13. 05evo
14. GotLeon
15. BANKS
16. DANERS_03
17. edtxag
18. slowevo4me
19. 04WWRS
20. greenpsycho
21. RedAustinIX
22. BoOsTinGEVO190

AND as for the PM me when its ready list:

1. NocturnalEVO
2. edtxag
3. jonpfive
4. northernevo
5. mike@forge
6. CRVdrftR05
7. EVOking8
8. Eggy
9. Reine
10. vanisher
11. GootBoost
12. M00kiE
13. spamsucks

 

--alright guys, another update to keep you all in the loop--

to avoid any crap with production and supply, we're going with another manufacturer. the one we WERE going to use was very irresponsible in getting back to me with ANYTHING. i was beginning to forsee an onslaught of problems that would ultimately trickle down and make my business look bad.

needless to say, the manufacturer we ARE NOW going with is also involved in the oem automobile industry. i'm going to physically meet with one of their production managers to take a tour of their facilities, discuss tooling & production costs, organize mass-production and finalize this project for everyone.

i hope you all stand behind me and trust that i'm doing everything i can to deliver the best goods to the evo community. thanks for all the support with this venture, have a safe and happy new year!!

 

Thanks for the update, Rich.

Better to do it right the first time around than having to fix someone else's screw ups later down the road!