I just never cared for the look of the Enkei NT03+M. Nice rims but not my style. Those CE28s look sick.

 

Looks sic, what tire size?

 

You should see the same wheel in matte black in 10.5 width! Talk about sick....

 

Any more pics?

 

Check the first page of this thread ... its the 2nd post.... his name is Casey

 

Should fit ok with fenders shaved .... might need a spacer in the front for the brakes. My enkei nt03+m set up is 18x9.5 +27 F and R ... but I have to run a 12mm spacer in the front to clear the brakes. All 4 fenders are shaved.

 

^ Thanks.

 

I have the 5zigen fn01rc's in 18x9.5 + 35 and it is damn close to the caliper. I piece of paper fits, its that close. I am running a 255/35 right now, and I will be going with a 265/35 once these tires need replaced. To run that tire I will probably need a spacer as there will be plently of tire rub on the control arm.

I will have pictures up in a couple of days...

 

i love the look of gold CE28N's on tarmac black!

 

these wheels look good that's what im kinda looking for..

 

with the 5Zigen FN01RC's, is your car lowered at all? cuz im lookin into buyin those wheels, and my car is lowered 2" front and 1.5" rear, i got the tein s-tech. i was hoping some1 could help me out.
thanks

 

I have the Tein FLEX suspension set on the factory settings for ride height.

It is not as drastic as the s techs. The rear you will probably be alright, but the front probably will rub with the s techs....

I could be wrong, but from seeing the minimal gap they leave...I would say they will not fit.

I will post pictures up of my car tommorow....it needs washed anyway

 

I ran a 265-35 series tire on my old set of 5zigens Fn's without needing any spacers.

 

What tires were you running at that time on the 265/35's...

Also what suspension did you have?

I dont see how 265/35 would fit on the inside, but I could be wrong. The fenders wouldnt be a problem as my drop isnt as drastic as others as I have a front lip which makes the front end too low as it is...

 

What are peoples thoughts on running a set of rota p45r in 18x9.5 with 285 kuhmo v710 as an autox setup? I see no one running this and I really love the look of these rims and want to try them out as a weekend autox rim for this season, and then next year make them my DD rims and pick up another set of 18x9.5 for racing...