New headlights on the block
^^ this is my video on how to open HLs... You have no excuse now!!
http://www.youtube.com/watch?v=PL2C7...ature=youtu.be
http://www.youtube.com/watch?v=PL2C7...ature=youtu.be
DAMN YOUUUUU DAMN YOU TO HEEELLLL!!!! NOW I HAVE TO DOO ITT!!!!
who does this mod? i would like to get this done for my Evo X. if someone can give me the info for who does i would appreciate it very much. My X is a show car i want to add this mod onto my car it would seriously stand out i have not seen one out in jacksonville with it yet i want to get this done.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
^^
* TSX requires NO cutting of the housing. You can a section of the projector to make it fit.
* FX-R 1.1's are what I've been using. They've been superseded by FX-R 3.0 which have different mounting hole locations. Havnt had the chance to use the new version in CT9A HLs. FX-R 1.1's require major trimming of the turn signal housing. Not advisable for the faint hearted..
Stick with TSX's
* TSX requires NO cutting of the housing. You can a section of the projector to make it fit.
* FX-R 1.1's are what I've been using. They've been superseded by FX-R 3.0 which have different mounting hole locations. Havnt had the chance to use the new version in CT9A HLs. FX-R 1.1's require major trimming of the turn signal housing. Not advisable for the faint hearted..
Stick with TSX's
Newbie
Joined: Mar 2012
Posts: 28
Likes: 0
From: Denver, CO
^^
* TSX requires NO cutting of the housing. You can a section of the projector to make it fit.
* FX-R 1.1's are what I've been using. They've been superseded by FX-R 3.0 which have different mounting hole locations. Havnt had the chance to use the new version in CT9A HLs. FX-R 1.1's require major trimming of the turn signal housing. Not advisable for the faint hearted..
Stick with TSX's
* TSX requires NO cutting of the housing. You can a section of the projector to make it fit.
* FX-R 1.1's are what I've been using. They've been superseded by FX-R 3.0 which have different mounting hole locations. Havnt had the chance to use the new version in CT9A HLs. FX-R 1.1's require major trimming of the turn signal housing. Not advisable for the faint hearted..
Stick with TSX's
fx-r 3.0 and rx-afs....
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
^^ speak to Matt at TRS and asked if they have any LHD FX-R 1.1's instock..
As I said, it's going to require a lot of work to make them fit... Other requirements to make them fit:
* custom brackets that take into account the mounting holes of the OEM projector + the mounting holes of the FX-R
* the FX-R sits a fairway forward than the OEM unit.. This will clash with the OEM shroud that covers the projector. You'll need to Dremel it out and fit a shroud that has more "depth"... I've used an E46-R shrouds in my retro's..
^^ don't say I didn't warn you...
Just go TSX's!! Much much easier
As I said, it's going to require a lot of work to make them fit... Other requirements to make them fit:
* custom brackets that take into account the mounting holes of the OEM projector + the mounting holes of the FX-R
* the FX-R sits a fairway forward than the OEM unit.. This will clash with the OEM shroud that covers the projector. You'll need to Dremel it out and fit a shroud that has more "depth"... I've used an E46-R shrouds in my retro's..
^^ don't say I didn't warn you...
Just go TSX's!! Much much easier
Newbie
Joined: Mar 2012
Posts: 28
Likes: 0
From: Denver, CO
^^ speak to Matt at TRS and asked if they have any LHD FX-R 1.1's instock..
As I said, it's going to require a lot of work to make them fit... Other requirements to make them fit:
* custom brackets that take into account the mounting holes of the OEM projector + the mounting holes of the FX-R
* the FX-R sits a fairway forward than the OEM unit.. This will clash with the OEM shroud that covers the projector. You'll need to Dremel it out and fit a shroud that has more "depth"... I've used an E46-R shrouds in my retro's..
^^ don't say I didn't warn you...
Just go TSX's!! Much much easier
As I said, it's going to require a lot of work to make them fit... Other requirements to make them fit:
* custom brackets that take into account the mounting holes of the OEM projector + the mounting holes of the FX-R
* the FX-R sits a fairway forward than the OEM unit.. This will clash with the OEM shroud that covers the projector. You'll need to Dremel it out and fit a shroud that has more "depth"... I've used an E46-R shrouds in my retro's..
^^ don't say I didn't warn you...
Just go TSX's!! Much much easier
No LHD FX-R....
Lightwerkz does good work, so do HIDillusionz, Lightmodz and BlackFlameCustoms
And no, I don't know why they all use the stupid Z at the end
Lightwerkz also just did an Evo retrofit: http://www.hidplanet.com/forums/show...l=1#post598925
And no, I don't know why they all use the stupid Z at the end
Lightwerkz also just did an Evo retrofit: http://www.hidplanet.com/forums/show...l=1#post598925
Last edited by llDemonll; Jun 26, 2013 at 01:06 PM.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia