So when are you gonna get us some et and trap speeds?!

 

Maybe tomorrow... Remind you it will only be on 93 oct. & I have a 6 spd...

 

i bet it will be pretty impressive!! good luck

 

As far as I know Collin @ Toxicfab should have sent my Tubular manifold to TCC the end of last week so they should have it tomorrow and I may have it by the end of the week!!



Also I have been having a ton of issue with my Tial Q bov...After doing more research I found that it is highly recommended to run a 1/4 inch vacuum line from the top of the bov straight to the manifold. Well, I actually have 2 Ts in the line from the top of the BOV to manifold. One is for my boost gauge and the other is for my MBC since the Buschur J pipe didn't have a nipple on it. Well, I am going to T the boost gauge into the fuel pressure regulator solenoid line, instead of where it currently is. I will probably also pull my J pipe off and have someone at work weld a nipple on it for my MBC. After that I will replace the 3/16 vacuum line I am currently using with 1/4 inch from BOV straight to the manifold. Hopefully that will solve some of my issues.

 

We have your manifold from Toxic Fab, should have it completed by Wednesday and shipped out to you. Sorry we couldn't get it done any faster, we have a ton of work right now.

 

Nice...haha I know you guys are busy by all the pics you are constantly posting on here and on facebook. Its all good...as long as I get the manifold by Tuesday or so next week. That will give me time to get it installed and retune before the Showdown event at Englishtown...

 

You should have it by then, you'll know right away after we send you the tracking number

 

Sweet, thanks carlos! Can't wait to see it all coated

 

So are you doing back to back testing with the ported stocker to the toxicfab mani? Can't wait to see this. If everything comes out good I will definitely be jumping on the ToxicFab bandwagon!

 

Thank you sir...

Correct, against a MAP ported stocker...

 

Wow. This one should be good because I think the MAP ported exh. mani is the most heavily ported one out there. sub'd.

EDIT: oh yeah. The black BBS wheels look sick in the OP. Would love to have a set.

 

Of course my results with my BBK Full won't be as high as they would on your FP Black setup but they should still end up being pretty nice...

Thanks for the complement on the wheels...I had them powder coated 3.5 yrs ago and still look great...I may be selling them come spring time, if you are interested...May finally be time for me to pick up a new set of wheels...haha...

 

I'm not expecting the results to be as high, but if you get the results of what would be expected of your setup then it will be very promising for larger setups. I got dibs when you're ready to sell the BBS wheels. I'll definitely have some extra throw-away around the spring time. lol

 

*ahem*

 

calm down silly...ill let u know 1st...Mr. Baller 35r over here will probably have a set of black BBSs by the time I go to sell mine anyway...