My Ongoing Build Thread, Thanks to Force Fed Perf., Spec Ops., MAP, Sparktech, etc...
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
haha...yes sir...class was definitely worth it...I really want to take the advance class now, since they actually have it at the same shop next weekend, but no funds right now & I really want/need to get my car back together...
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
Alright some more updates...
Calipers painted, stickered & cleared...I am letting them cure till the weekend & I'm putting them on Saturday then bleeding the brakes Sunday...
Turbo is together! Well, everything but the oil return line...Saturday I ordered STM's Oil Return Line & it will be here tomorrow...
https://www.evolutionm.net/forums/ev...roclassic.html
Here are pics of the turbo...MAP ported & coated stock manifold, CBRD BBK Full, MAP 02 Dump, Brand new Oil feed line, Water feed & return lines, etc...
Turbo will be going on tomorrow once I get the oil return line...
Calipers painted, stickered & cleared...I am letting them cure till the weekend & I'm putting them on Saturday then bleeding the brakes Sunday...
Turbo is together! Well, everything but the oil return line...Saturday I ordered STM's Oil Return Line & it will be here tomorrow...
https://www.evolutionm.net/forums/ev...roclassic.html
Here are pics of the turbo...MAP ported & coated stock manifold, CBRD BBK Full, MAP 02 Dump, Brand new Oil feed line, Water feed & return lines, etc...
Turbo will be going on tomorrow once I get the oil return line...
Calipers look great brotha
I want to do black as well to match my wheels. Getting pumped for you to get the full on to tell me what you think! Look forward to updates, keep up the good work
I want to do black as well to match my wheels. Getting pumped for you to get the full on to tell me what you think! Look forward to updates, keep up the good work
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
hahah....Updates!!!!
AMS Remote Oil Pressure Line Installed...its not as close to the axle as it looks in the picture...Wiring is all ran where I want it to be for my AEM Oil Pressure Gauge, just need to finish the power & ground...
Turbo & new BOV on!!
FINALLY! Everything is back in the engine bay! New stuff from my last setup....CBRD BBK Full turbo, Tial Q BOV & JMF non recirc Intake pipe...
Throwing fluid in today and putting the calipers and pads on...depending on time, I may bleed the brakes, if not then Ill do that tomorrow...
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
Its alive!! Just need to finish bleeding the brakes after work...Ill post some more updated pics later too...
Haha sure...ill at least post an idle video tonight...there will be plenty of video from the up and coming events I'm going to...
Oct. 2nd - Autox @ Englishtoen
Oct. 7th - Track day event @ NJMP
Oct. 23rd - Showdown @ Englishtoen
And ill probably go to Island Dragway once or twice within that time for test & tune nights...
Haha sure...ill at least post an idle video tonight...there will be plenty of video from the up and coming events I'm going to...
Oct. 2nd - Autox @ Englishtoen
Oct. 7th - Track day event @ NJMP
Oct. 23rd - Showdown @ Englishtoen
And ill probably go to Island Dragway once or twice within that time for test & tune nights...
Evolved Member
Joined: Oct 2007
Posts: 3,640
Likes: 1
From: Florida
Its alive!! Just need to finish bleeding the brakes after work...Ill post some more updated pics later too...
Haha sure...ill at least post an idle video tonight...there will be plenty of video from the up and coming events I'm going to...
Oct. 2nd - Autox @ Englishtoen
Oct. 7th - Track day event @ NJMP
Oct. 23rd - Showdown @ Englishtoen
And ill probably go to Island Dragway once or twice within that time for test & tune nights...
Haha sure...ill at least post an idle video tonight...there will be plenty of video from the up and coming events I'm going to...
Oct. 2nd - Autox @ Englishtoen
Oct. 7th - Track day event @ NJMP
Oct. 23rd - Showdown @ Englishtoen
And ill probably go to Island Dragway once or twice within that time for test & tune nights...
Thread Starter
Evolved Member
iTrader: (90)
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
Ill post some more updates later...found out my front 02 sensor is shot & only has 25k miles on it...sucks & also the BOV spring is too stiff (11 psi) & I need an 8 psi spring...02 sensor will be coming in tomorrow from a local parts store & I am heading to Extreme PSI after work tomorrow to pick up an 8 psi BOV Spring...