my project since last couple of months and still
#1
Evolving Member
Thread Starter
iTrader: (39)
Join Date: Jan 2010
Location: new york
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
my project since last couple of months and still
unlike most of poeple here, for some reason when i fell inlove with a car i start buying things for it before i even get the car .
with that beying sed:
i picked up the wheels from mega-z (another evom member)
and the turbo kit from a very good friend of mine that wrecked his car a few months ago.
after i was finished with the sti project i decided to hunt down an affordable evo 8. for those wondering what the sti looked like:
so i had found an 03 as evo 8 with high mileage at a very low price so i jumped on it, i didnt mind the motor cuss i was gonna send it in for a full built
so after i bought the car and took the motor out for a built procedure i decided to take the car to a body shop to paint the engine bay
with that beying sed:
i picked up the wheels from mega-z (another evom member)
and the turbo kit from a very good friend of mine that wrecked his car a few months ago.
after i was finished with the sti project i decided to hunt down an affordable evo 8. for those wondering what the sti looked like:
so i had found an 03 as evo 8 with high mileage at a very low price so i jumped on it, i didnt mind the motor cuss i was gonna send it in for a full built
so after i bought the car and took the motor out for a built procedure i decided to take the car to a body shop to paint the engine bay
Last edited by alanarias22; Dec 3, 2010 at 09:22 AM.
#3
Evolving Member
Thread Starter
iTrader: (39)
Join Date: Jan 2010
Location: new york
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
when i took the car to the body shop i decided to paint the whole car since it had a couple of scratches, i figuered i'd change the color and paint it like my fx since i love that color,
had bought an evo 9 front bumper so i had the paint that also
after 2 weeks in the body shop the car was finally out, and on its way to the fun part
had bought an evo 9 front bumper so i had the paint that also
after 2 weeks in the body shop the car was finally out, and on its way to the fun part
#5
Evolving Member
Thread Starter
iTrader: (39)
Join Date: Jan 2010
Location: new york
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
while the car was at the body shop my motor was being built.
this is what it looked like before droping it on the car:
I did a little list of all the parts that if not already on the car then they r in my garage ready to go on the car.
My Evo's mods(ENGINE)
Built 2.1 motor stroker
Carrillo k1 rods
Wiseco hd o ringed pistons
Ams Balance shaft elimination kit
Crower bearings
Arp mainstuds
Arp headstuds
Built cnc machined head
Ferrea 1mm oversized valves
Ferrea titanium valve springs
Ferrea titanium retainers
Ferrea bronze guides
Kelfords 272 cams
Speed-tek catch can
(TURBO/INTAKE/EXHAUST/FUEL)
Ams gt35r turbo kit
Ams vsr intake manifold
Ams fuel rail
Ams 3.5 fmic
Boomba tb
Pte 1000 cc injectors
Dual walbro 255 pumps
Br dual stage boost controller
Sparch-tek pro cdi/coils
Speed-tek Custom uicp
Speed-tek Custom licp
Tial bov 50mmTial waste gate
44mmFujitsubo rm01a catback exhaust
(POWER/DRIVETRAIN)
Shep built transfer case
Quarter master twin clutch
Awd perfo... Aluminum drive shaft
DSS level 5 rear axles
(WHEELS/TIRES/HANDLING)
works cr-Kai 18x9.5 +22
works lugs
Dunlop direzza 255/35/18
Project kicks 10mm spacers (front)
BC BR coilovers
Dba drilled & slotted rotors
Cusco 3 points front tower bar
Cusco 3 points trunk bar
Cusco 23mm adjustable rear sway bar
(INtERIOR)
Complete ssl interior
Cf a pillars
Orbital DD kit
Pioneer headunit
Aem boost gauge
Aem wide band
Aem oil temp
Aem water temp
Evodave ashtray gauge pod
Rexpeed dash pod
Blox shift knob
Evo 9 steering wheel
Evo 9 cf a/c vent panel
Evo 9 mr e-brake handle
Trust gauge over lay
(EXTERIOR)
Evo 9 front bumper
Evo 9 JDM rear bumper
Evo 9 mr headlights
Evo 9 mr taillights
Evo 9 rear spoiler
Rexpeed ralliart cf lip
Rexpeed cf ducts
Rexpeed cf side spats
Rexpeed cf side skirt ext
Rexpeed cf rear bump ext
Rexpeed cf heat shield
Rexpeed roof wing
Evodave wide fender kit
ill keep ya posted with more pics tonight
this is what it looked like before droping it on the car:
I did a little list of all the parts that if not already on the car then they r in my garage ready to go on the car.
My Evo's mods(ENGINE)
Built 2.1 motor stroker
Carrillo k1 rods
Wiseco hd o ringed pistons
Ams Balance shaft elimination kit
Crower bearings
Arp mainstuds
Arp headstuds
Built cnc machined head
Ferrea 1mm oversized valves
Ferrea titanium valve springs
Ferrea titanium retainers
Ferrea bronze guides
Kelfords 272 cams
Speed-tek catch can
(TURBO/INTAKE/EXHAUST/FUEL)
Ams gt35r turbo kit
Ams vsr intake manifold
Ams fuel rail
Ams 3.5 fmic
Boomba tb
Pte 1000 cc injectors
Dual walbro 255 pumps
Br dual stage boost controller
Sparch-tek pro cdi/coils
Speed-tek Custom uicp
Speed-tek Custom licp
Tial bov 50mmTial waste gate
44mmFujitsubo rm01a catback exhaust
(POWER/DRIVETRAIN)
Shep built transfer case
Quarter master twin clutch
Awd perfo... Aluminum drive shaft
DSS level 5 rear axles
(WHEELS/TIRES/HANDLING)
works cr-Kai 18x9.5 +22
works lugs
Dunlop direzza 255/35/18
Project kicks 10mm spacers (front)
BC BR coilovers
Dba drilled & slotted rotors
Cusco 3 points front tower bar
Cusco 3 points trunk bar
Cusco 23mm adjustable rear sway bar
(INtERIOR)
Complete ssl interior
Cf a pillars
Orbital DD kit
Pioneer headunit
Aem boost gauge
Aem wide band
Aem oil temp
Aem water temp
Evodave ashtray gauge pod
Rexpeed dash pod
Blox shift knob
Evo 9 steering wheel
Evo 9 cf a/c vent panel
Evo 9 mr e-brake handle
Trust gauge over lay
(EXTERIOR)
Evo 9 front bumper
Evo 9 JDM rear bumper
Evo 9 mr headlights
Evo 9 mr taillights
Evo 9 rear spoiler
Rexpeed ralliart cf lip
Rexpeed cf ducts
Rexpeed cf side spats
Rexpeed cf side skirt ext
Rexpeed cf rear bump ext
Rexpeed cf heat shield
Rexpeed roof wing
Evodave wide fender kit
ill keep ya posted with more pics tonight
Last edited by alanarias22; Dec 3, 2010 at 09:49 AM.