I want to see how they look but I haven't really came accross anyone who has them. I was going to paint them white for my white 9.

 

igot them on my ww 03 ...let me see if i can sum up a nice pic

 

 

check my build thred

 

I had white hella horns on my white Evo if you search for my weightless white voltex thread.

 

here, i made it easier:
(nice evo oreo)
https://www.evolutionm.net/forums/ev...-widebody.html

 

on my 7



found this on here, hes painted the centre one black

 

I run a Hella truck horn (~300Hz). The horn is mounted below the driver's side headlight and hidden by the front clip. I only bought one. Didn't see any reason for a pair, just as I can't think of a reason why the horn should be seen. If only the Supertones were available, I would have painted them black.



Stock next to the Hella. FWIW, the Hella tips the scales at ~1.5lbs.

 

Do you have a sound clip of the horns in action?

 

How is the mounting with them? I want to keep both above the intercooler is possible.

 

you have to make a bracket for them, I need to get around to doing mine

 

I don't. Mine sounds like a relatively big truck. It's easily noticed by other motorists when used as a safety feature, as intended. That was the whole point of the upgrade.

 

i mounted mine to where the intercooler bolts to the radiator support! might be hard having them both there because the fan gets in the way. My orginal plan was to have them both up there to but just mounted the second where the factory horn is!

its longer taking the bumper off then actually fitting them.

 

Thanks! but yeah, like nursebetty said, I also made a bracket, just a 7 or so inch long black bracket, bolted it where the intercooler bolts up, and drilled 2 holes for the horns to bolt up to. they are easy to wire, just ground one of the leads and connect the other to the stock horn's positive wire and you are good.