BJCH Custom EVO8 Intake Manifold
#1
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Mar 2003
Location: Columbus, OH
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
BJCH Custom EVO8 Intake Manifold
Check out all the glorious details in the technical section. Built to flow air up to single digit EVOs and still bolt your stock TB on to start with or upgrade to the Accufab 75mm TB (not included). Includes a flowbenched design with tapered tuned-length runners and a properly sized surge tank for big power EVO's and modest upgrades alike. It is lighter and cleaner than stock. It eliminates your EGR system and requires some bending of the oil dipstick tube.
It comes with 5 1/4" NPT taps on the end of the surge tank for accesories and systems and can include at no extra cost the bung to bolt your stock MDP sensor (all others just require a hosebarb) to use stock ECU's and reflashes, etc. It also features a tab to bolt your throttle linkage to and adjust to suit.
It includes the big bore fuel rail (configured for -8 AN fitting).
A second fuel rail (mounted underneath to mirror the upper rail) can be added for $150 (including rail) and direct port N2O bosses can be added (requires drilling the holes when ready to install so you can get them now and don't have to figure out how to plug them until you are ready to use it) for $50.
The price is $950 including free 3 day freight. The single rail units are in stock and ready to rock. Additional setups and features can be added very easily.
For images, check this thread; they are right at the top:
https://www.evolutionm.net/forums/sh...threadid=50794
For orders call 937.642.5400 and ask for Robin.
For technical call and ask for Mark.
We accept VISA, MC and AmEx.
Paypal account is sales@quantum-racing.com.
Thanks,
Mark
www.Quantum-Racing.com
It comes with 5 1/4" NPT taps on the end of the surge tank for accesories and systems and can include at no extra cost the bung to bolt your stock MDP sensor (all others just require a hosebarb) to use stock ECU's and reflashes, etc. It also features a tab to bolt your throttle linkage to and adjust to suit.
It includes the big bore fuel rail (configured for -8 AN fitting).
A second fuel rail (mounted underneath to mirror the upper rail) can be added for $150 (including rail) and direct port N2O bosses can be added (requires drilling the holes when ready to install so you can get them now and don't have to figure out how to plug them until you are ready to use it) for $50.
The price is $950 including free 3 day freight. The single rail units are in stock and ready to rock. Additional setups and features can be added very easily.
For images, check this thread; they are right at the top:
https://www.evolutionm.net/forums/sh...threadid=50794
For orders call 937.642.5400 and ask for Robin.
For technical call and ask for Mark.
We accept VISA, MC and AmEx.
Paypal account is sales@quantum-racing.com.
Thanks,
Mark
www.Quantum-Racing.com
#2
Evolving Member
Thread Starter
iTrader: (12)
Join Date: Mar 2003
Location: Columbus, OH
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Here is a photo for the lazy guys to peak their interest. Click the link above, too.
Mark
www.Quantum-Racing.com
Mark
www.Quantum-Racing.com
Thread
Thread Starter
Forum
Replies
Last Post
Whoop_ass
Evo Engine / Turbo / Drivetrain
26
Sep 30, 2009 04:04 AM
peter*g
Evo Engine / Turbo / Drivetrain
15
May 5, 2008 06:10 AM
Inn-Tune
Evo 'For Sale' External Engine / Power
1
Nov 13, 2006 08:10 AM