FPred/E85(E70) 1.0CF DD Dyno
FPred/E85(E70) 1.0CF DD Dyno
Here are my mods:
FPred - P&P by FP, Coated by MAP
Cosworth - MX1's
Stock Ex. Mani - P&P, Coated by MAP
AMS - FMIC, LICP, UICP, Intake, Underhood Bushings
TBE - (BR Bullet Dual, UR TP, AMS Widemouth)
Works - SS & Base Bushings
Perrin - 3-port, 2" Antenna
BlaqOPS - Progressive Boost Double Pumper
Deatschwerks - 1000cc Inj's w/E85
MAP AFPR Setup
Crushed Stock BOV, JMFab catch can
Here are the charts, for reference Stock X's Dyno at 205-210whp on this dyno.
Keep in mind I am still on the stock clutch it held up to 6 hours of dyno time no prob!
I included some reference dyno's so everyone can realize how this dyno reads. There is more left in the setup once true E85 comes along, we didn't go too crazy on it, but the car feels amazing.
I am going to possibly try the dom2 actuator next tune to see if we can hold some more boost, we are maxed at 6500 after for wgdc.



Current Vs. Stock Turbo E85


Current Vs. Evo 9 E85 Fpred


Current Vs. Pump Gas FPred (A different Car)

Current Vs. BBK 8 (schiedes at some point)


Current Vs. Almost stock w/stock tune


Shootout Mode (these seem pretty spot on for some dynojet numbers, I will hit MAP up soon)

Dyno Vid!
http://www.youtube.com/watch?v=NfD_P7GsjIk
FPred - P&P by FP, Coated by MAP
Cosworth - MX1's
Stock Ex. Mani - P&P, Coated by MAP
AMS - FMIC, LICP, UICP, Intake, Underhood Bushings
TBE - (BR Bullet Dual, UR TP, AMS Widemouth)
Works - SS & Base Bushings
Perrin - 3-port, 2" Antenna
BlaqOPS - Progressive Boost Double Pumper
Deatschwerks - 1000cc Inj's w/E85
MAP AFPR Setup
Crushed Stock BOV, JMFab catch can
Here are the charts, for reference Stock X's Dyno at 205-210whp on this dyno.
Keep in mind I am still on the stock clutch it held up to 6 hours of dyno time no prob!
I included some reference dyno's so everyone can realize how this dyno reads. There is more left in the setup once true E85 comes along, we didn't go too crazy on it, but the car feels amazing.
I am going to possibly try the dom2 actuator next tune to see if we can hold some more boost, we are maxed at 6500 after for wgdc.



Current Vs. Stock Turbo E85


Current Vs. Evo 9 E85 Fpred


Current Vs. Pump Gas FPred (A different Car)

Current Vs. BBK 8 (schiedes at some point)


Current Vs. Almost stock w/stock tune


Shootout Mode (these seem pretty spot on for some dynojet numbers, I will hit MAP up soon)

Dyno Vid!
http://www.youtube.com/watch?v=NfD_P7GsjIk
Boost coupler came off and we didn't have time to remove the bumper so my tuner came in on Sunday to finish, was pretty awesome. Consistently this dyno reads 12-15% lower than MAPerformance's Dynojet which is local as well. So somewhere between 460-480 is probably where I will land on a dynojet. My previous dyno on this one was 353ish and I picked up a little over 40whp going to MAP's dyno, which was 11%. He said that was one of the lowest gains from dyno to dyno he had seen. Lots of variables so I don't worry about it, all I care is that the care feels awesome.
Trending Topics
My a/f is above, 2nd graph in.
We aren't running it too lean or adding too much timing, since this is winterblend e85. I would expect another 10whp hopefully from the straight e85 and a little more aggressive tune.
Timing at the top is 16-17. A little lower than 24-25 we had on the stock turbo, lol.
We aren't running it too lean or adding too much timing, since this is winterblend e85. I would expect another 10whp hopefully from the straight e85 and a little more aggressive tune.
Timing at the top is 16-17. A little lower than 24-25 we had on the stock turbo, lol.
(see first graph)I would never not give that out, I don't want to be a hypocrite. Hold 26 to redline. I will be putting this on a dynojet in the next few weeks.


