10.2 Android 6.0 Q/A
#106
Evolving Member
When you cut the plastic, did you trim off the piece completely including the side edge? If you imagine the tab, the tab connects to the side of the vent. You need to take off that bit as well. Take off a little at a time and you'll be able to fit it perfectly. I used an exacto knife, but be careful because you can cut yourself.
Hi all,
I just bought this head unit and I am currently in the process of installing it in my Lancer. I am having trouble putting the AC vents on the new head unit. I already cut a piece of plastic that was in the way.
Would any of you have some tips on getting the vents to fit properly?
Thanks!
I just bought this head unit and I am currently in the process of installing it in my Lancer. I am having trouble putting the AC vents on the new head unit. I already cut a piece of plastic that was in the way.
Would any of you have some tips on getting the vents to fit properly?
Thanks!
The following users liked this post:
samlancer (May 9, 2017)
#109
I am only looking for the latest firmware update for my android 6.0. The way this stuff is posted in confusing me lol. Can someone explain a bit of what im looking at with these
links
links
#110
Go to reset network settings then scroll down and hit reset factory default. It should reset the radio. I had the same issue u had. The bluetooth OBII didn't work for me so I brought the WiFi one and its works just fine. As far as the Bluetooth streaming, i use a ipod and use A2DP and it works fine for me.
#111
#113
The latest firmware is on this page
https://www.evolutionm.net/forums/ev...d-6-0-q-5.html
https://www.evolutionm.net/forums/ev...d-6-0-q-5.html
#120
Evolving Member
Thread Starter
Here is May System Update.
PX6 6.0 UPDATE (20170504) https://www.sendspace.com/pro/dl/h46x4e
MCU still at 2.44
V2.44 https://www.sendspace.com/pro/dl/y64l27
V2.51 https://www.sendspace.com/pro/dl/t7yqft
Also I'm using a custom rom.
https://forum.xda-developers.com/and...evice-t3598908
Download: https://yadi.sk/d/U-UjLXbC3JDmt3
A custom rom is just a System Update, different than the MCU. We have to use our vendor MCU.
PX6 6.0 UPDATE (20170504) https://www.sendspace.com/pro/dl/h46x4e
MCU still at 2.44
V2.44 https://www.sendspace.com/pro/dl/y64l27
V2.51 https://www.sendspace.com/pro/dl/t7yqft
Also I'm using a custom rom.
https://forum.xda-developers.com/and...evice-t3598908
Download: https://yadi.sk/d/U-UjLXbC3JDmt3
A custom rom is just a System Update, different than the MCU. We have to use our vendor MCU.
Last edited by NinjaX; May 26, 2017 at 08:31 PM.