hi
openport 2.0 was damaged and after use it to write rom, ecu was bricked
how to recover it with ecuflash? VERY need answer, fast plz

 

get an AP ?

 

you said you wrote it, did you read it first and save the original software or did you just write right over it?? if you did i dont know if you can recover it.

 

C'mon man. He didn't ask what you think he should get but about ROM recovery with ECUFlash. I know you just got an AP and are thrilled but some people don't want an AP.

 

+1. And even with a AP it might not fix it.

To KOTT good luck. I know there's was a guy with a MR that brink the ECU also with ECUflash( but that was his mistake). But the point is, he had to get a new ECU.

 

If yours is broken, Did you try another flash cable and write again?

 

not yet

 

PM'd you

 

Since we have experience flashing CZ4As and CY4As since April '08, we can fix most "bricked' ECUs.

If you send it in, we'll inspect it and if it's fixable there will be a small fee depending on the time it takes. If it cannot be fixed, there will be no charge.

 

+1

 

it was recovered

 

by whom, how?

 

Those who pray will be saved; those who do not pray will not be saved.