Gauges needed for a turbo upgrade...
Gauges needed for a turbo upgrade...
So I want to upgrade to the FP Green, I was wondering what gauges I needed for such an upgrade. Obviously I would need the boost and the wideband, but with the MR, would I need anything else?
Boost, Wideband A/F, and EGT at the least I would say. That's everything that goes with the Zietronix ZT-2.
Anything beyond those 3 would just be personal preference really. Maybe some others will have some input.
FWIW I've seen some prosport guages recently that looked pretty good if you want to go on a budget.
Anything beyond those 3 would just be personal preference really. Maybe some others will have some input.
FWIW I've seen some prosport guages recently that looked pretty good if you want to go on a budget.
I'd say oil pressure instead of EGT if you are going to be running a wideband afr anyway because they both tell you practically the same thing. Go with a dependable wideband and gauges in general not cheapy ones, when you're monitoring important engine data the last thing you want is your gauge to be off with whatever its reading.
I was just going to comment,that I thought the wideband and the egt measure the same. I was going to go AEM all the way. I will consider oil pressure, I was also thinking trans temp as well, especially with the MR trans
Thread
Thread Starter
Forum
Replies
Last Post
erggy
General Engine Management / Tuning Forum
3
Oct 4, 2008 06:19 AM
hytek369
EvoM New Member / FAQs / EvoM Rules
10
Sep 10, 2008 04:22 PM




