Curious as to how many hp the stock turbo can support, as well as the stock injectors, and intercooler....just read some posts where guys are saying they run the stock turbo at 30lbs w/ e85 (fp red says it w/stands 35lbs...?)...haven't found any threads about what the stock intercooler or injectors can support (yet, I'm still searching!)

 

Guess nobody knows and the answer would be just to upgrade them???

 

Maybe someone saw a 30 psi spike and got all excited, but every single dyno sheet I have seen (and witnessed on my own car) shows that after 26-27 psi the stock turbo is completely maxed out. Further along these lines, you cannot run stock injectors with E85, my car on 800 cc DW injectors, a Walbro pump and E85 was at 95% duty cycle.

On a stock turbo, with bigger injectors, fuel pump and E85 on a Mustang Dyno you are looking at 360 to 370 whp and 370 to 390 ft /lbs, max (DynoJets will read higher).


You don't gain much (if anything) with aftermarket intercooler, intake, and intercooler pipes.

 

thanks for the input bro, I was just curious as to what each could w/stand before being maxed out. That thread I was looking at the guy was running 850cc's on e85...again thanks for the help