Ordering an FP green turbo with 18 psi wastegate actuator and ported housing tomorrow, and was looking for advice on if i actually need a walbro fuel pump and bigger injectors..or any other supporting mods that i havent mentioned that i may need to reach my goal of 380-400whp with this turbo. Any tips? I already have intake, tbe, and fmic, cobb ap and grimmspeed 3 port.

 

For pump gas, stock pump will be fine with FIC900/ID1000
For E85 you'd need to upgrade the pump and FIC1100

 

Just like laksman said you should be fine with stock pump if you want peace of mind get the walbro, they are cheap and easy as hell to install. Make sure regardless of what fuel pump you have, get the upgraded fuel pump relay. Also a wideband would be great to keep an eye on things. If you need a hand putting anything in let me know I live in lemon grove and have a good size garage with decent amount of tools. good luck

 

cool man thanks for the reply's. I had all that in my old evo (03') and yea that pump is pretty easy to install, im sure its just as easy in a x. Ill look into some FIC900 and see whats up. A garage would have been nice the other day when i was installing my ETS V2 exhaust. Still need to throw on my AMS widemouth, but im gonna wait till my turbo comes in and do both at once.

 

How much is your green and where did u ordered it ?

 

have you installed the turbo yet? what injectors you go with?

 

I would do the intercooler piping as well...you will most likely need full bolt ons with the green to get to 400whp.....add some came and be over 400.