Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Sst will only watch gear sometimes

Thread Tools
 
Search this Thread
 
Old Mar 10, 2015 | 06:59 AM
  #1  
hotsos's Avatar
Thread Starter
Newbie
 
Joined: Dec 2009
Posts: 22
Likes: 0
From: san antonio texas
Sst will only catch gear sometimes

My MR seems to drive normal sometimes and others won't catch gear but will just rev up and not move. And sometimes the reverse R will just blink Any ideas? I'm stumped. I have the sst clutch pack upgraded. Also seems to only happen in cold weather. 60 degrees and above it works fine

Last edited by hotsos; Mar 10, 2015 at 01:51 PM. Reason: Word correcting
Reply
Old Mar 10, 2015 | 07:16 AM
  #2  
Ev0ikon's Avatar
Evolved Member
iTrader: (18)
 
Joined: Jan 2004
Posts: 3,677
Likes: 11
From: 3rd Rock {from = sun}
Clutch material going thin?
Reply
Old Mar 10, 2015 | 01:28 PM
  #3  
hotsos's Avatar
Thread Starter
Newbie
 
Joined: Dec 2009
Posts: 22
Likes: 0
From: san antonio texas
I have barely had them for a few months and I havnt tracked or driven it hard. So no clue. And it only happens when it's cold 60 degrees and above seems to work fine.

Last edited by hotsos; Mar 10, 2015 at 01:50 PM. Reason: Did it wrong
Reply
Old Mar 10, 2015 | 02:01 PM
  #4  
alsong2002's Avatar
Evolving Member
iTrader: (2)
 
Joined: Feb 2011
Posts: 290
Likes: 0
From: phoenix
who did the clutch install? what miles on the tranny?
Reply
Old Mar 10, 2015 | 02:49 PM
  #5  
hotsos's Avatar
Thread Starter
Newbie
 
Joined: Dec 2009
Posts: 22
Likes: 0
From: san antonio texas
My shop (Jms racing) drove the tranny up to kozmic to install the clutches. I got about 8k on the new clutches. Cleaned the ssp reusable tranny filter and put new fluid in also
Reply
Old Mar 10, 2015 | 03:23 PM
  #6  
alsong2002's Avatar
Evolving Member
iTrader: (2)
 
Joined: Feb 2011
Posts: 290
Likes: 0
From: phoenix
if Kozmic did the installation of the clutches than you will be fine. however, if the tranny is old and u just upgrade the clutch without refreshing the entire tranny that might be the problem.
did you or your shop did the teach-in after clutch installed?
the blinking R gears is usually a signal of blown or malfunction of the tranny.
Reply
Old Mar 10, 2015 | 04:23 PM
  #7  
hotsos's Avatar
Thread Starter
Newbie
 
Joined: Dec 2009
Posts: 22
Likes: 0
From: san antonio texas
Yes I did a teach in And also it works sometimes and other times it just blinks . I only upgraded the clutches and not the forks Is it still blown If it works sometimes and not all the time? What else is there to upgrade ?
Reply
Old Mar 10, 2015 | 04:53 PM
  #8  
alsong2002's Avatar
Evolving Member
iTrader: (2)
 
Joined: Feb 2011
Posts: 290
Likes: 0
From: phoenix
Originally Posted by hotsos
Yes I did a teach in And also it works sometimes and other times it just blinks . I only upgraded the clutches and not the forks Is it still blown If it works sometimes and not all the time? What else is there to upgrade ?
the best things is to refresh the entire tranny when you can. i used to have the blink on my 09 ralliart, i did ended up the sold it at about 60k.
you can call kozmic to see what they suggest you to do.
Reply
Old Mar 11, 2015 | 02:56 PM
  #9  
jayyyw's Avatar
Newbie
 
Joined: Dec 2014
Posts: 73
Likes: 0
From: Austin
Best bet is to call Kozmic and see if they have any ideas. Did JMS tune the SST tables after the clutch install?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sgambino92
Evo Engine / Turbo / Drivetrain
0
May 27, 2018 07:30 PM
JohnnyBoy427
Lancer Tranny/Drivetrain Tech
3
Jul 13, 2007 05:38 AM




All times are GMT -7. The time now is 07:58 PM.