Well I finally got around to installing my downpipe and like everyone else I've gotten plenty of bruises, cuts and scrapes but it's finally out. One of the 02 housing bolts snapped into the turbo housing and now i can't get a good angle to drill it out
On the car.
My question is, I've removed every bolt
Off the exhaust manifold, the one bracket on the turbo from the top and now the only thing that is left is the bottom bracket that goes into the hot side of the turbo, How do you go about removing this bolt since its in such a ****ty spot? Any help or tips are greatly appreciated. Thanks

 

This thread should help you https://www.evolutionm.net/forums/ev...tallation.html

 

Thanks.. I actually used that guide but wasn't able to get clear directions of how to actually get that bottom bracket bolt out for the hot side of the turbo. I tried getting right under it with an extension and swivel head and it would just come off the bolt because of the awkward angle.

 

You need a 14mm universal socket. A socket and a universal separately does not work. Sears sells them for 9 bucks. Everyone should have one.