Anyone have a how-to installing an aem uego wideband afr? I finally got some time to install this coming Tuesday and I really don't want to have to go to a shop to install this thing. I'm thinking it's a pretty straight forward gig looking at the parts and components. The part number of the aem is the 30-4100.

I'm also going to install the aem boost gauge at the same time. I have an extra bung on the dp/o2 housing so the wideband sensor could go there.

I see the how to for the boost gauge, is the wideband also the straight forward?

I can see that wire tucking is the main and tedious part of the boost gauge, and looking and reading that thread, I'm thinking of going through the firewall so I would have some slack in the line as to not accidentally tug and wreck the connection.

If there's no how-to, I might have to go on this install blind but I would make a how to, and maybe a how-not-to install the wideband afr! Haha!

But, if u know or have a link for the install, I would be more than happy to read it and maybe improve upon it.

I really don't want to go on this install blind, coz the X is my DD. I could drive the Z to work but I'm spoiled by the X. I don't want to fry any circuits or fuses.

 

Here's a link from the Ralliart section. Should be exactly the same for the EvoX.
https://www.evolutionm.net/forums/09...-wideband.html

 

Thanks for the link!