Quad projector headlights in the making
Newbie
Joined: Feb 2009
Posts: 33
Likes: 0
From: The Dark Side
Ive said this a few times now:
The projector in the DRL housing is NON OPERATIONAL. I can only fit the FRONT half of a projector in there. No room to fit a WHOLE one due to:
* The design of the E46 shroud &
* some operation components in the back which get in the way that I cant hack away... So essentially it is a Quad Projector LOOK only.
The only wiring in the DRL housing are for the Red LED & Halo.. The OEM DRL bulb has been removed and the OEM DRL wiring just sits redundant at the back.
. I applaud your efforts its well deserved. Just curious, about how much additional room do you think you need to make them functioning and is it feasible?
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
^^
I would really like to retrofit an operational projector in the DRL housing.
Limiting factors:
* I can't position the shroud anymore forward otherwise you will see gaps around the edges
* the orientation of the DRL housing in relation to the BiXenon projector are not "parallel" with each other. In other words, retrofitting a whole projector "directly" on would make the light shine outwards instead of front on. Retrofitting the projector to be parallel would mean one side of the shroud needs to be installed further inward into the headlight which is not what I want. This comment is based on the design of the E46 shrouds coz that's the only shroud I've worked with.
* the various projectors that I've worked with "seem" too big width and especially length wise. However, there's one projector that I'd really like to get my hands on. That's the "Mini H1" HI projector. Not sure if it'll fit but I'm willing to give it a crack. Anybody wanna send one my way to find out??
I would really like to retrofit an operational projector in the DRL housing.
Limiting factors:
* I can't position the shroud anymore forward otherwise you will see gaps around the edges
* the orientation of the DRL housing in relation to the BiXenon projector are not "parallel" with each other. In other words, retrofitting a whole projector "directly" on would make the light shine outwards instead of front on. Retrofitting the projector to be parallel would mean one side of the shroud needs to be installed further inward into the headlight which is not what I want. This comment is based on the design of the E46 shrouds coz that's the only shroud I've worked with.
* the various projectors that I've worked with "seem" too big width and especially length wise. However, there's one projector that I'd really like to get my hands on. That's the "Mini H1" HI projector. Not sure if it'll fit but I'm willing to give it a crack. Anybody wanna send one my way to find out??
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
Owner in the US installed these yesterday and only gave me a sneak peak shot.
Expect a photo shoot to come.
Currently working on number 3... Will look pretty much the same as these ^^
Expect a photo shoot to come.
Currently working on number 3... Will look pretty much the same as these ^^
Thread Starter
Evolving Member
iTrader: (2)
Joined: Jun 2007
Posts: 137
Likes: 1
From: Darwin, Australia
This question is for people that know electronics and what not.
So ive been wanting to do a fog light delete and have the inner blinker/hazard orange lights stay on with the projecters, how would i go about doing that? would i need a separate relay?
So ive been wanting to do a fog light delete and have the inner blinker/hazard orange lights stay on with the projecters, how would i go about doing that? would i need a separate relay?