Where on the lancer should you place a floor jack, front and back of car, and where should you place the jack stands, front and back? thanks for the help!

 

Most cars are the same. For the front just a little bit back behind the wheel well, for the back a little bit before the wheel well. If you look underneath you will see a little metal lip with some indactors on there where to place your jack.

 

That I do know, but, where do you place the floor jack to get the front or back of the car up so you can place the jack stands under the car?

 

been awhile sinc ei was in auto shop but..could of sworn it was the same spot...so jack p then palce stand...wold go look under mine to amke sure but 4:30 in the morning kinda dark..sorry no much help

 

I usually put it under the frame, both for the floor jacks and the stands, cause i dont trust the scissor jacks for workin under the car... if u look where the indicators are for the scissor jack, look a bit more inboard and you'll see the black frame, theres a bolt stickin out of the frame, just put the jack in front of the bolt, theres enough room

 

I can't say that I know where to put the floor jack in referrence to the front and middle of the car. However if you are using a floor jack on a car and are lifting either front side, there is usually a larger flat spot right under the strut tower and suspension assemble with one bolt and nut in the middle that is a load bearing point for all vehicles. Hope this helps.