I will buy a new downpipe but i want to get ona that fits with original tie bars and does not ratle,
any sugestions on these maters ?

 

by the way its an evo 9mr

 

search please!!!!.. as long as you get a 2.75 or less DP you wont have an issue rubbing against the bars!! and again the SEARCH button is your Best friend!!!

 

WORKS 70mm, Tanabe, HKS, Helix are just a few.

 

well i have a buschur downpipe and it does not rattle or anything. it's 3" and it clears the ACD perfectly. i have an 06 btw

 

I've heard good things about the Buschur DP fitment, seems like a good choice.

 

Helix V2..fits my 06MR, had to shim the cross braces but I believe you have to do that on every DP...And it's a full 3inch all the way no neckdowns and a 100% beautiful piece , got it from GruppeS..great peeps and awesome service..

 

I have an hks 3'' down pipe it clears.. but rubs at a quick stops or fast braking.. but nothing to worried about. I like the 3'' more flow.

 

DC Sports... downpipe & cat delete all in one piece.

 

Ten-four on the DC Sports DP, as it clears ACD and no need for spacers on the chassis bars. Nice fitment and no rattles.

 

Ditto on the DC sports DP w/cat-delete........great fit....only have to shim the front bar about 1/4 inch.....rear fits fine

 

Tanabe my friend!

 

[QUOTE=evo72man;4268574]I have an hks 3'' down pipe it clears.. but rubs at a quick stops or fast braking.. but nothing to worried about. I like the 3'' more flow.[/QUOTE]

the only way 3" will have an advantage over a 2.75 is if your putting more then 400whp too the ground. then the 3" will be your best bet but 2.75 is as good and you wont have any problem with clearance at ALL. But hey some members dont have problems with there 3 inch with rubber issues sooo whatever you choose either a 2.75 or a 3" you cant go wrong with either..thats my $.02

 

+ 1